Table of Contents
Advertisement
[B.GAMMA RANGE]
Sets the maximum level of compression/expansion.
[1]
[2]
[3]
[KNEE SETTING]
This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[KNEE MODE]
Sets the knee operation mode.
The items that can be set are as follows.
f [AUTO], [MANUAL], [OFF]
[A.KNEE RESPONSE]
Sets the auto knee response speed. The smaller the setting value, the faster the response speed is.
The items that can be set are as follows.
f [1]...[8]
[KNEE POINT]
Sets the knee point position in 0.5% steps.
The items that can be set are as follows.
f [70.0%]...[107.0%]
[KNEE SLOPE]
Sets the knee inclination.
The items that can be set are as follows.
f [0]...[99]
[HLG KNEE SW]
Enables/disables the operation of knee for HLG.
The items that can be set are as follows.
f [ON], [OFF]
[HLG KNEE POINT]
Sets the position of the knee point for HLG.
The items that can be set are as follows.
f [55]...[100]
[HLG KNEE SLOPE]
Sets the inclination of knee for HLG.
The items that can be set are as follows.
f [0]...[100]
[WHITE CLIP SETTING]
This cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[WHITE CLIP]
Turns the white clip function [ON]/[OFF]. The setting value of [WHITE CLIP LEVEL] is enabled when the function is [ON].
The items that can be set are as follows.
f [ON], [OFF]
[WHITE CLIP LEVEL]
Sets the white clip level.
The items that can be set are as follows.
f [90%]...[109%]
[DRS]
Enables/disables the dynamic range stretcher function.
If functions are assigned to the USER buttons, [ON]/[OFF] can be switched using the USER button operations.
The items that can be set are as follows.
f [ON], [OFF]
@
NOTE
t The setting is fixed to [OFF] when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[DRS EFFECT DEPTH]
Sets the compression level of the high luminosity areas of the dynamic range stretcher function.
Chapter 4 Operation — Menu settings
Around 20%
Around 30%
Around 40%
– 81 –
Advertisement
Table of Contents
