Knee Function; White Clip Function - Panasonic AJ-UPX360ED Operating Instructions Manual

@
NOTE
t Gamma function cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].

Knee function

This function sets the compression of video signals to prevent halation in images.
r General settings
Use the camera with the factory settings.
r Advanced settings
Set with the [SCENE FILE] menu → [KNEE SETTING].
[KNEE MODE]: Sets the operation mode of knee function ([AUTO]/[MANUAL]/[OFF]).
f When [AUTO] is selected in [KNEE SETTING]
[A.KNEE RESPONSE]: Sets the speed of response. The smaller the setting value, the faster the response speed is.
f When [MANUAL] is selected in [KNEE SETTING]
[KNEE POINT]: Sets the knee point position in 0.5% steps.
[KNEE SLOPE]: Sets the knee inclination.
@
NOTE
t Knee function cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].

White clip function

This function sets the brightest part of video signals to be not brighter than a certain level.
r General settings
Use the camera with the factory settings.
r Advanced settings
Set with the [SCENE FILE] menu → [WHITE CLIP SETTING].
[WHITE CLIP]: Turns the white clip function [ON]/[OFF]. This enables the [WHITE CLIP LEVEL] setting value when the function is [ON].
[WHITE CLIP LEVEL]: Sets the white clip level.
@
NOTE
t White clip function cannot be set when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
Chapter 5 Shooting — Image quality adjustment
– 134 –