Bardiani Valvole GIOTTO TOP Instruction, Use And Maintenance Manual page 13

4 Checking / Unpacking / Lifting
3.1 Giotto Top electrical connections
4 Checking / Unpacking / Lifting
1. CHECK:
- Make sure the control unit shows no signs of damage caused during transport and that it corresponds
with the order;
2. UNPACKING:
The control unit packaging is made up of cardboard, wood and plastic.
The control unit is primarily made from plastic materials. The gaskets are usually made from elastomers.
Disposal must be in compliance with local legislation.
3. VALVE LIFTING:
Exercise caution when lifting the control unit.
.
WARNING!
Before lifting, make sure there are no disassembled or separate parts which could fall off causing injury
to persons and damage to the valve.
4. WAREHOUSING:
Avoid storing the control unit in a damp, dusty, wet or excessively hot place. Avoid areas subjected to
strong vibrations.
13
EN-IST-GIOT360-1021