Using Boot Manager
The Boot Manager allows the boot order to be changed without accessing the BIOS Setup
Utility. To use the Boot Manager, perform the following:
NOTE:
NOTE:
The F12 Boot Menu option must be set to Enabled in the BIOS Setup Utility's Main
screen. (refer to Main)
To use the Boot Manager, perform the following steps:
1. Start the computer.
2. Press F12 when prompted during POST procedure. The Boot Manager dialog is shown.
(Figure 2-33)
Boot Option Menu
1: IDE 0: Hitachixxxxxxxx
2: IDE 1: Optiarc DVD RW xxxxxx
4: Network Boot: MBA v9.4.5 xxxxx
and
Figure 2-33. Boot Manager Dialog
3. Use the and keys to highlight a boot device.
4. Press Enter to select an option and continue the boot procedure.
System Utilities
to change option, ENTER to select an option
0
Boot Manager
2-27