Using Boot Manager
The Boot Manager allows the boot device to be changed without accessing the BIOS.
NOTE:
The F12 Boot Menu option must be set to Enabled in the BIOS Setup Utility's Main
screen. (refer to Main)
To use the Boot Manager, perform the following steps:
1. Start the computer.
2. When prompted, press F12 during POST procedure. The Boot Manager dialog is shown.
(Figure 2-29)
3. Use the and keys to highlight the boot device.
4. Press Enter to select an option and continue the boot procedure.
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
2-24
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru
NOTE:
Figure 2-29. Boot Manager Dialog
0
System Utilities