Table of Contents
Advertisement
Replacing the TouchPad
1.
Using both hands, replace the TouchPad, front edge first, as shown.
NOTE: Ensure that the TouchPad cables are accessible once the TouchPad is in place and that all cables
pass through the casing properly.
Replacing the LCM Module
1.
Align the four screw holes on the LCM Module hinges with the corresponding screw holes on the chassis.
Lower the LCM Module into position as shown. Ensure that the LCM cables are inserted through the
aperture before proceeding (yellow marker).
2.
Secure the four screws to hold the LCM in place on the chassis.
Chapter 3
87
Hide quick links:
Advertisement
Table of Contents
