Table of Contents
Advertisement
LCM Module Disassembly Procedure
Removing the LCM Bezel
CAUTION: When using tools, be careful not to scratch the computer casing.
1.
Locate and remove the four mylar (small red markers) and two rubber (large red markers) screw covers
as shown.
NOTE: Do not discard the screw covers — they are reusable.
2.
Remove the six bezel securing screws.
3.
Loosen the bezel by lifting all the edges upward as shown.
4.
Push in the cover locks to allow the bezel to pass freely over them.
Chapter 3
77
Hide quick links:
Advertisement
Table of Contents
