Table of Contents
Advertisement
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
System Memory
Extended Memory
Video Memory
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Chapter 2
Description
Sets the system time. The hours are displayed
with 24-hour format
Sets the system date
This field reports the memory size of the system.
Memory size is fixed to 640MB
This field reports the memory size of the
extended memory in the system
(Extended Memory size=Total memory size-
1MB)
Shows the VGA memory size
Determines if Customer Logo will be displayed or
not; shows Summary Screen is disabled or
enabled
Enabled: Customer Logo is displayed, and
Summary Screen is disabled
Disabled: Customer Logo is not displayed, and
Summary Screen is enabled
Enables or disables the system boot from LAN
(remote server)
Enables or disables Boot Menu during POST.
Enabled: During quite boot, the OEM POST
screen displays Press <F12>Change Boot
Device
Disabled: During quite boot, the OEM POST
screen does not display Press <F12>Change
Boot Device
Note: This Boot device change is applies to
next boot only.
Enables or disables D2D Recovery function. The
function allows the user to create a hidden
partition on hard disc drive to store operation
system and restore the system to factory defaults
Format/Option
Format: HH:MM:SS
(hour:minute:second)
Format MM/DD/YYYY
(month/day/year)
Enabled
Option:
or Disabled
Enabled
Option:
or Disabled
Disabled
Option:
or Enabled
Enabled
Option:
or Disabled
47
Hide quick links:
Advertisement
Table of Contents
