Bios Utility; Boot Sequence; Enable Disk-To-Disk Recovery; Setting Passwords - Acer TravelMate 5344 User Manual

The BIOS utility is a hardware configuration program built into your 
computer's BIOS.
Your computer is already properly configured and optimized, and you do
not need to run this utility. However, if you encounter configuration
problems, you may need to run it.
To activate the BIOS utility, press <F2> during the POST while the
notebook PC logo is being displayed.
B
OOT SEQUENCE
To set the boot sequence in the BIOS utility, activate the BIOS utility, then
select Boot from the categories listed at the top of the screen.
E
NABLE DISK
To enable disk-to-disk recovery (hard disk recovery), activate the BIOS
utility, then select Main from the categories listed at the top of the screen.
Find D2D Recovery at the bottom of the screen and use the <F5> and
<F6> keys to set this value to Enabled.
S
ETTING PASSWORDS
To set a password on boot, activate the BIOS utility, then select Security
from the categories listed at the top of the screen. Find Password on
boot: and use the <F5> and <F6> keys to enable this feature.
68
BIOS
- -
TO DISK RECOVERY
UTILITY