Tray Full - Ricoh FD5000 Manual

Tray Full

A pair sensors are used to detect the tray full condition. At the start of every job:
• Tray full sensor (Emitter) [A] emits a signal to tray full sensor (Receptor) [B].
• As long as the signal remains unbroken the multi-folder will continue to operate and feed folded paper
to the top of the unit [C].
• When the top of the stack grows high enough to interrupt the signal between the tray full sensors [D],
this will signal the machine to shut down the line temporarily.
• After the operator removes the stack from the top tray, folding and paper exit will resume.
Tray Full
2
145