Ricoh FD5000 Manual page 162

2. Details
Sensors
S Positioning Roller HP Sensor
2
S Stopper 1 Paper Sensor
S Stopper 1 HP Sensor
S Jogger Fence HP Sensor
S FM6 Pawl HP Sensor
S Registration Sensor
S Registration Roller HP Sensor
S Dynamic Roller HP Sensor
S Fold Plate HP Sensor
S Direct-Send JG HP Sensor
S Stopper 2 Paper Sensor
S Stopper 2 HP Sensor
S Bypass Exit Paper Sensor
S Bypass Entrance Paper Sensor
160
Detects when the jog roller is in and out of its home
position.
Checks for the presence of paper at power on.
Also checks for jams during paper feed. Detects
the condition of the stacked sheets during multi-
sheet folding.
Detects when Stopper 1 is in and out of its home
position.
Detects when jogger fence is in and out of its home
position.
Detects when the FM! pawl is in and out of its home
position.
Checks for the presence of paper at power on.
Also checks for jams during paper feed. Used to
create timing for registration buckle adjustment
during paper feed. Detects the condition of the
stacked sheets during multi-sheet folding.
Detects when registration roller is in and out of its
home position.
Detects when dynamic roller is in and out of its
home position.
Detects when the fold plate is in and out of its home
position.
Detects when the direct-send junction gate is in
and out of its home position.
Checks for the presence of paper at power on.
Also checks for jams during paper feed. Used to
create operation timing of the LE pawl solenoid.
Detects when Stopper 2 is in and out of its home
position.
Checks for the presence of paper at power on.
Checks for the presence of paper at power on.