2. Details
Crease Rollers
2
The amount of pressure exerted by the crease rollers can be adjusted. This can be done to eliminate splitting
that can occur with coated paper and other types of media. The adjustment is a manual adjustment done
on springs.]
Adjustment range
Default Load
Load Adjustment Possible (Hook 4 mm Distance)
A projection fixed in slot and attached to a spring shortens the length to roller can be lowered. There are
four crease rollers. Springs at the front and rear ends of each roller can be adjusted.
144
R1
R2
R3
26 N
45 N
-4.5 N
-9.5 N
R4