Table of Contents
Advertisement
CHECKING THE FRONT FORK/
ADJUSTING THE REAR SHOCK ABSORBER
2
a
b
1
3. Hold the vehicle upright and apply the
front brake.
4. Check:
• front fork operation
Push down hard on the handlebar several times
and check if the front fork rebounds smoothly.
Rough movement
Refer to "FRONT FORK" in chapter 4.
ADJUSTING THE REAR SHOCK ABSORBER
V V V V V
WARNING
Securely support the vehicle so that there is no
danger of it falling over.
Spring preload:
CAUTION:
Never go beyond the maximum or minimum
adjustment positions.
1. Adjust:
•
spring preload
a. Adjust the spring preload with the special tool.
Suspension set wrench
90890 - 01519
90890 - 01520
b. Turn the adjusting ring 1 in direction a or b.
c. Align the desired position on the adjusting ring
with the stopper 2.
Spring preload is increased
Direction a a a a a
Spring preload is decreased
Direction b b b b b
Adjusting positions
3-38
CHK
ADJ
Repair.
-->
(suspension is harder
(suspension is softer)
Minimum:
1
Standard:
2
Maximum:
5
Advertisement
Chapters
Table of Contents
Troubleshooting
