P02：Offset Set-Up Sub-Function - Omega PHCN-962 User Manual

5.2 P02：OFFSET SET-UP SUB-FUNCTION
HOLD HOLD
1.In P02 sub-function form, Press
measurement mode. The lower display shows POFS. The right lower display show offset. LCD main
display zone shows ORP actually measured value in ORP measurement mode. The lower display
shows UOFS. The right lower display show offset.
2.User can press
return to P02 sub-function form. Use
Note ： Press
measurement mode automatically.
HOLD
ENT
07.00
. LCD main display zone shows pH actually measured value in pH
to adjust offset to modify measurement value. Press
or
to quit set-up mode at anytime. Instrument will return to
SET SET
HOLD
ENT
to select other sub-function to set up.
or
MEA
7.00
PH
SPI SP2 ATC
ESC
O C
I2.00 25.0
to confirm and
done
25