Operating The Base On The Pabx - Gigaset E560A Manual

Resetting the base to the default settings
When the settings are restored:
•
Date and time are retained
•
Handsets are still registered,
•
Eco Mode is deactivated,
•
The system PIN is not reset.
¤
Menu Settings
The answer machine is ready for use approx. 15 seconds after the base has been
connected or reset.

Operating the base on the PABX

The following settings are only necessary if your PABX requires them; see the PABX user guide.
Changing the dialling mode
¤
Menu
= tone dialling (DTMF);
R
Switching temporarily to tone dialling (DTMF)
If your PABX still operates with pulse dialling (PD), but you need tone dialling for a connection
(e.g., to listen to the network mailbox), you must switch to tone dialling for the call.
Prerequisite: You are conducting a call or have already dialled an external number.
¤
Press the star key
Tone dialling is now activated for this call only.
Setting recall
¤
Menu
= 80 ms;
R
= 600 ms;
Changing the pause after line seizure
You can set the length of the pause inserted between pressing the talk key
phone number.
¤
Menu
= 1 second;
Changing the pause after recall key
¤
Menu
= 800 ms;
en fr es
OK System
R
= pulse dialling (PD)
.
R
= 100 ms; = 120 ms;
= 800 ms OK
R
= 3 seconds;
R
= 1600 ms; = 3200 ms
Operating the base on the PABX
OK Reset Base
Enter digit for the dialling mode:
OK
Enter digits for recall:
= 400 ms;
Enter digit for the current pause length:
= 7 seconds OK
Enter digit for the current pause length:
OK
OK
= 250 ms; = 300 ms;
and sending the
49