Section 5: Accessories - Grizzly G0726 Owner's Manual

ACCESSORIES

SECTION 5: ACCESSORIES

Some aftermarket accessories can be
installed on this machine that could cause
it to function improperly, increasing the risk
of serious personal injury. To minimize this
risk, only install accessories recommended
for this machine by Grizzly.
NOTICE
Refer to the newest copy of the Grizzly
Catalog for other accessories available for
this machine.
H8368—Electric Power Drawbar
Reduce your tool changing time to a fraction. This
easy-to-use Power Drawbar kit will enable you
to make tool changes in a flash on both manual
and CNC milling machines. It has enough torque
for tapers ranging from R-8 to NT50 and simple
installation is supported by complete instructions.
Specifications: Motor 220V, 7.5 maximum amper-
age draw, 2100 RPM, and 240 ft/lbs.
Figure 50. H8368 electric power drawbar.
order online at
Model G0726 (Mfg. Since 7/11)
www.grizzly.com
H5791—NT40 Quick Change Collet Set
This self-ejecting system offers quick change outs
and precise, rigid control. This set comes supplied
with an NT40 collet chuck, wrench and fitted plas-
tic case. NT40 collets are sized
⁄ ", ⁄ ", ⁄ " and 1".
5 3 7
8 4 8
Figure 51. H5791 NT40 Quick Change Collet
T23962—ISO 68 Moly-D Way Oil, 5 gal.
T23963—ISO 32 Moly-D Machine Oil, 5 gal.
Moly-D oils are some of the best we've found for
maintaining the critical components of machinery
because they tend to resist run-off and maintain
their lubricity under a variety of conditions—as
well as reduce chatter or slip. Buy in bulk and
save with 5-gallon quantities.
T23962
Figure 52. ISO 68 and ISO 32 machine oil.
1-800-523-4777
or call
⁄ ", ⁄ ", ⁄ ",
1 1 3
8 4 8
Set.
T23963
-41-
⁄ ",
1
2