Rotating The Head; Ram Movement; Moving Ram Back & Forth - Grizzly G0726 Owner's Manual

Rotating the Head

Tools Needed
Wrench or Socket 19mm ................................... 1
Wrench or Socket 23mm ................................... 1
To rotate the head:
1. DISCONNECT MILL FROM POWER!
2. Loosen the four hex nuts behind head plate
(see Figure 34).
Hex
Nut
Figure 34. Head rotation controls.
3.
Supporting weight of head, slowly turn rota-
tion bolt.
Note: Turn rotation bolt clockwise to rotate
head left and counterclockwise to rotate it
right.
4.
Re-tighten hex nuts to secure head in place.
Always lock the head firmly in place after
adjusting the tilt or rotation. Unexpected
movement of the head during operations
could cause the cutter to bind with the
workpiece, which could result machine or
workpiece damage.
Model G0726 (Mfg. Since 7/11)
Qty
Rotation Bolt

Ram Movement

The ram moves back-and-forth horizontally and
rotates 360° around the column.
Tools Needed
Wrench 17mm.................................................... 1
Wrench 19mm ................................................... 1
Moving Ram Back & Forth
1. DISCONNECT MILL FROM POWER!
2. Loosen the two locking bolts shown in
Figure 35.
Locking
Bolts
Adjustment Bolt
Figure 35. Ram horizontal movement controls.
3.
Slowly turn adjustment bolt to move ram to
desired position along horizontal scale.
Note: Turn adjustment bolt clockwise to
move ram back and counterclockwise to
move ram forward.
4.
Re-tighten locking bolts to secure ram in
place.
Qty
Horizontal
Scale
-33-