Philips Brilliance 272P7 User Manual page 8

2. Setting up the monitor
Connecting to your PC
2
1
MHL-HDMI
3 4 5
1
AC power input
2 Power Switch
3 MHL-HDMI input
4 Display port input
5 mini Display port input
6
VGA input
7 DisplayPort output
8 Audio input, Earphone jack
9 USB upstream
10 USB downstream
11
USB fast charger/USB downstream
12
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the
back of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
USB
Fast Charger
11
10
9
12
6 7 8
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
USB hub
To comply with International energy
standards, the USB hub/ports of this
display are disabled during
and Power Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in "ON" state, please go to OSD Menu,
then select "USB standby mode", and
switch it to "ON" state.
USB charging
This display has USB ports capable of
standard power output including some
with USB Charging function (identifiable
with power icon
ports to charge your Smart phone or
power your external HDD, for example.
The display must be powered ON at all
times to be able to use this function.
Some select Philips displays may not
Power or Charge your device when it
enters to "Sleep/Standby" mode (White
power LED blinking). In that case,
please enter to OSD Menu and select
"USB Standby Mode", then, turn the
function to "ON" mode (default=OFF).
This will then keep the USB power and
charging functions active even when the
6
Standby
). You can use these