Panasonic KX-TGD320E Operating Instructions Manual page 41

– store a phone number to which the unit
makes the call to.
– turn on the new message alert setting.
After you answer the new message alert call,
you can listen to messages from that call
(page 41).
Important:
R A new message alert is stopped 1 minute
after the unit starts to call. The unit will not
retry the call even if the call is not answered.
Storing a phone number to which the
unit makes an alert call
n From the phonebook:
1
MMENUN#338
2
MbN: "Notification to" a MOKN
a MADDN
3
MbN: "Phonebook" a MOKN
4
MbN: Select the desired phonebook
entry. a MOKN a MOFFN
n By entering a phone number:
1
MMENUN#338
2
MbN: "Notification to" a MOKN
a MADDN
3
MbN: "Manual" a MOKN
4
Enter the desired name (16 characters
max.). a MOKN
5
Enter the desired number (24 digits
max.). a MOKN 2 times a MOFFN
Turning on/off the new message alert
setting
1
MMENUN#338
2
MbN: "On/Off" a MOKN
3
MbN: Select the desired setting. a MOKN
a MOFFN
Editing the set phone number
1
MMENUN#338
2
MbN: "Notification to" a MOKN
3
MMENUN a MbN: "Edit" a MOKN
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
TGD31x_32xE(en)0202_ver201.pdf
4
5
Erasing the set phone number
1
2
3
4
Activating/inactivating the remote
access code to play messages
If you activate this feature, you must enter the
remote access code (page 42) to play the
new message from the new message alert
call. This is so that unauthorised parties
cannot listen to your messages. The default
setting is "Inactivate".
– "Inactivate": You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
– "Activate": You must enter your remote
access code and then press 4 to play new
message.
1
2
3
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
n When the remote access code is set to
"Inactivate":
Press 4 to play the new message during
the announcement.
n When the remote access code is set to
"Activate":
1
41
Answering System
Edit the name if necessary (16 characters
max.). a MOKN
Edit the phone number if necessary (24
digits max.). a MOKN 2 times a MOFFN
MMENUN#338
MbN: "Notification to" a MOKN
MMENUN a MbN: "Erase" a MOKN
MbN: "Yes" a MOKN a MOFFN
R The new message alert setting is
turned off.
MMENUN#338
MbN: "Remote Code" a MOKN
MbN: Select the desired setting. a MOKN
a MOFFN
Enter the remote access code
(page 42) during the announcement.
41
2015/02/02 14:00:41