Quick Instructions For Daily Use; Preparation And Starting; Cancelling A Programme; Adding Laundry - Beko DSV64W User Manual

7

Quick instructions for daily use

7.1 Preparation and starting

1. Press the "On/Off" button.
2. Place the laundry in the machine.
3. Select the programme.
4. Close the loading door.
5. Press "Start/Pause/Cancel" button.

7.2 Cancelling a programme

A new programme can be selected and start-
ed after "Programme cancel" is activated in
order to change the drying programme.
In order to cancel the selected programme,
press "Start/Pause/Cancel" button for about
3 seconds. The "Filter cleaning and "0/ Anti-
creasing" warning LEDs will light up at the
end of this period for reminding purposes.

7.3 Adding laundry

In order to add laundry after the start-up of
the programme:
1. Press "Start/Pause/Cancel" button.
2. Open the loading door and put the
laundry in.
3. Close the loading door.
4. Press "Start/Pause/Cancel" button to
start the programme.
26 / EN
7.4 Changing the programme
after the programme has
started
You can use this feature after your machine
has started to dry your clothes under higher
or lower temperatures. Press and hold the
"Start/Pause/Cancel" button for about 3 sec-
onds to switch the machine into the "Cancel"
status in order to change the programme.
Change the programme and press "Start/
Pause/Cancel" button to start it.
7.5 After the programme is
finished
The "0/Anti-creasing" and "Filter cleaning"
warning LEDs on the programme follow up
indicator will light up when the programme
comes to an end. The door can be opened
and the machine becomes ready for a second
cycle.
1. Press the "On/Off" button to shut down
the machine.
2. Take out the laundry from the machine.
3. Check if there are any foreign objects in
the machine.
4. Clean the filter after drying.
Dryer / User Manual