Figure 3-17. Mainboard
+
IMPORTANT:
Circuit boards >10 cm² have been highlighted with a yellow rectangle as
shown in
regulations for disposal.
Mainboard Installation
1. Place Mainboard onto the base assembly. Refer to
2. Install and secure two (2) screws (E) to mainboard. Refer to
3. Connect Power Switch Board cable (I), Speaker cable (J) and Touch Pad cable (K) to
mainboard connector. Refer to
4. Connect Bluetooth cable (B), LVDS cable (F) to mainboard connector
5. Place DC-in cable into the cable guide on the mainboard and secure it with the tape
(H). Refer to
6. Connect DC-in cable to mainboard connector (G)
7. Secure the WLAN antennas (D) to the cable guides on the thermal module
(Figure
3-15).
8. Connect WLAN antenna (D) to WLAN card
9. Install HDD Module.
ID
Size
F
M2.5*4.0 Ni
Machine Maintenance Procedures
Figure
3-17. Remove the Circuit board and follow local
Figure
Figure
3-15.
Figure
3-16.
(Figure
3-15).
(Figure
3-15).
Quantity
2
3-14.
Figure
3-15.
(Figure
3-15).
Screw Type
0
3-21