Table of Contents
Advertisement
Manually enter your SSID
Set up the connection to the AP (e.g. wireless router) manually by
entering the SSID.
3
Use H I to select Manually enter your SSID, then press OK.
AP (e.g. wireless router) SSID entry screen will appear.
●
Enter the SSID using H I J K, then press OK.
4
Use H I to select the authentication setting of the selected
wireless network.
For a wireless network with authentication setting, select
●
the authentication setting, according to the security type of
the wireless network.
Auto
XXXXXXXXXXXXXX
Manually enter your SSID
None
Set the authentication setting to None.
WEP
Set the authentication setting to WEP
Others
Set the authentication setting to Others.
For a wireless network without authentication setting, select
●
None.
If you select WEP
or Others, WEP
*
●
appear. Enter the WEP
/ others key of the selected wireless
*
network using H I J K, then press OK.
Confirmation message will appear. Select Yes to complete the
●
settings.
* WEP is not recommended to be used due to its major security
flaws. Change the security protocol on the wireless router to
others (recommended) mode.
None
WEP
Others
.
*
/ others Key entry screen will
*
IP configuration
In following cases, select IP configuration to set each setting as
necessary.
When connection test failed with the setting of Connection
–
test.
When instructed by your Internet service provider to make
–
specific settings in accordance with your network
environment.
2
Use H I to select IP configuration, then press OK.
3
Use H I to select a setting, then press OK.
Network selection
IP setting mode
Wireless network setting
IP address
IP configuration
Subnet mask
Proxy configuration
Default gateway
DNS setting mode
Primary DNS
Secondary DNS
MAC address
Auto
Sets the IP setting automatically.
IP setting
mode
Manual
Sets the IP setting manually.
A set of numbers which are assigned
IP address
to devices participating in a computer
*1, 3
network.
A mask which is used to determine
Subnet mask
*1, 3
what subnet an IP address belongs to.
IP address of the network device (such
Default gateway
as router) which provides internet
*1, 3
access.
Auto
Sets the DNS setting automatically.
DNS setting
mode
Manual
Sets the DNS setting manually.
A server which handles the name and
Primary DNS
*2, 3
IP address over the internet.
A server which handles the name and
Secondary DNS
*2, 3
IP address over the internet.
An address which recognizes the
MAC address
devices connecting to the network. It
is also called hardware address.
Items can be selected only when IP setting mode is set to
*1
Manual.
Items can be selected only when DNS setting mode is set to
*2
Manual.
Use H I or the NUMBER buttons to input numbers. When
*3
you use H I to input numbers, then press OK or input the
triple digits by using the NUMBER buttons, the cursor moves
to the next entry field. When you use H I to input numbers,
then press OK or input the triple digits by using the NUMBER
buttons at the rightmost entry field, numbers will be stored
and go back to the previous menu.
Note(s)
The range of input numbers is between 0 and 255.
●
If you enter a number larger than 255, the number will automatically be 255.
●
The manually entered number will be saved even if you change the setting to
●
Auto.
If you want to enter 1 or 2 digit number in one cell, press OK to move on to the
●
next cell.
If the entered IP address or the default gateway or primary DNS number is same
●
as the default setting, IP address setting will be set to Auto. (The manually
entered number will be saved).
When IP address setting is set to Manual, the setting of DNS setting will
●
automatically be Manual and when IP address setting is set to Auto, you can set
either Auto or Manual for DNS setting.
41
.
English
Auto
Manual
Continued on next page.
Advertisement
Table of Contents
