Magnavox 55MV387Y Owner's Manual page 32

Preferences
You can set the unit to reduce the power consumption or adjust
the backlight brightness in Location setting.
fun-Link (HDMI CEC) allows you to operate your connected HDMI-
CEC device.
Setting your location to home
Choosing Home gives you full flexibility to change predefined
settings for picture and sound.
1
Use H I to select Preferences, then press OK.
2
Use H I to select Location, then press OK.
Location
Language
Preferences
fun-Link (HDMI CEC)
Restore default settings HDMI mode
TV placement
Retail Demo
3
Use H I to select Home, then press OK.
The unit will be set up with predefined settings
Retail
for retail displays. In this setting, you can set the
backlight brighter.
The unit is set to maximize the energy efficiency
for home setting and it can be adjusted through
Home
a choice of picture and sound quality selections
according to your preference.
Note(s)
You must set Home in the menu. Otherwise, personalized picture and sound
●
settings will not be memorized after the unit goes into standby mode.
HDMI mode
If there are issues with picture/color and/or sound when
connecting an external device using the HDMI port, please try
switching the HDMI mode following the instructions below.
1
2
3
4
5
6
7
Retail
Home
The HDMI connector with HDMI mode set to Max 4K@30Hz (Compatibility)
●
supports up to UHD 30P, while The HDMI connector with HDMI mode set to Max
4K@60Hz supports up to UHD 60P. The HDMI connector with HDMI mode set to
Max 4K@60Hz + HDR supports up to UHD 60P with HDR signal.
Switching the HDMI mode may cause loss of HDMI CEC functionality in certain
●
cases.
TV placement
To apply the best settings for your TV, select wall mount or stand
mount.
1
2
3
Retail Demo
When you set Location to Retail, E-sticker (Electronic Sticker) is
displayed. E-sticker can be turned off using procedure below.
1
2
3
Press Z and use J K to select Setup, then press OK.
Use H I J K to select TV settings, then press OK.
Use H I to select Installation, then press OK.
Use H I to select Preferences, then press OK.
Use H I to select HDMI mode, then press OK.
Use H I to select HDMI1, HDMI2 or HDMI3, then press OK.
Use H I to select Max 4K@60Hz + HDR, Max 4K@60Hz or
Max 4K@30Hz (Compatibility) depending on the output
capabilities of the external device, then press OK.
When switching the HDMI configuration, the screen will
●
black out for a moment, then come back on.
Note(s)
Use H I to select Preferences, then press OK.
Use H I to select TV placement, then press OK.
Use H I to select Wall mounted or On a TV stand, then press
OK.
Use H I to select Preferences, then press OK.
Use H I to select Retail Demo, then press OK.
Use H I to select Off, then press OK.
32 .
English
Continued on next page.