Care, Maintenance & Cleaning - ReliOn WMTBPA-845 Manual

CARE, MAINTENANCE & CLEANING
• Clean the blood pressure monitor body and cuff
carefully with a slightly damp, soft cloth. Do not press.
Do not wash cuff or use chemical cleaner on it. Never
use thinner, alcohol or petrol (gasoline) as cleaner.
• Leaky batteries can damage the unit. Remove the
batteries when the unit will not be used for a long time.
• Follow local ordinances and recycling instructions
regarding disposal or recycling of the device and
device components, including batteries.
• If the unit is stored near freezing, allow it to acclimate to
room temperature before use.
• This blood pressure monitor is not field serviceable.
You should not use any tool to open the device nor
should you attempt to adjust anything inside the
device. If you have any problems with this device,
please contact ReliOn ®
information can be found on the warranty page).
• Do not immerse the unit in water as this will result in
damage to the unit.
• Do not subject the monitor or cuff to extreme
temperatures, humidity, moisture, or direct sunlight.
Protect from dust.
• Do not fold the cuff and tubing tightly.
Consumer Relations (contact
25
• Do not disassemble the monitor or cuff. If in need of
repair, refer to the warranty section of this manual.
• Do not subject the monitor to extreme shocks (do not
drop on floor).
• Do not inflate the cuff unless wrapped around arm.
• Do not wrap the cuff around body parts other than your
arm.
• Do not drop or insert any object into any opening or
hose.
• To avoid accidental strangulation keep this product
away from children. Do not drape tube around neck.
• This monitor may not meet its performance
specifications if stored or used outside of these
temperature and humidity ranges:
• Storage/Transportation • Operating
Environment
Temperature:
- 13°F~158°F
(-25°C~70°C)
Humidity:
less than 93% RH
Environment
Temperature:
41°F~104°F (5°C ~40°C)
Humidity:
15% ~ 93% RH
26