Autoopen - Miele G6620SC Operating Instructions Manual

AutoOpen

At the end of programmes with a drying
phase (see "Programme chart") the
door will open automatically a little in
order to help the drying process.
This function can be deactivated if
wished.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the Start button in and whilst
holding it in switch the dishwasher
on using the  button.
Keep the Start button pressed in for
at least four seconds until the Start
indicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Programme options
 Press the  button seven times.
The  indicator will flash rapidly 7
times at intervals.
The flashing sequence in the display in-
dicates whether the "AutoOpen" func-
tion is activated or not.
–  : "AutoOpen" activated
–  : "AutoOpen" deactivated
 Press the Start button to change the
setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.

If you have deactivated the auto-
matic door opening function and
would like to open the door as soon
as the programme has finished make
sure that you open the door fully.
Otherwise steam from the dish-
washer could damage the edge of
the worktop because the fan is no
longer running.
55