Energy Management; At The End Of The Programme - Miele G6620SC Operating Instructions Manual

Operation

Energy management

To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a button has been
pressed or 10 minutes after the end of
the programme (see "Programme op-
tions, Optimise standby").
 Press the  button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
46

At the end of the programme

The programme has finished when .
appears in the time display and the
door has opened slightly.
With the QuickPowerWash programme
the door will not open until a few
minutes after the programme has fin-
ished.
The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.
 Open the door completely to re-en-
gage the door closing mechanism.
You can now empty the dishwasher.

If you have deactivated the auto-
matic door opening function (see
"Programme options, AutoOpen"),
and would like to open the door as
soon as the programme has finished
make sure that you open the door
fully.
Otherwise steam from the dish-
washer could damage the edge of
the worktop because the fan is no
longer running.