Using Port For The Printer - Epson WF-4830 Series User Manual

Product Information
Resolution
Page Memory
*
Redial
Interface
* The specifications may differ by country or region.

Using Port for the Printer

The printer uses the following port. These ports should be allowed to become available by the network
administrator as necessary.
When the Sender (Client) is the Printer
Use
File sending (When scan to network folder is
used from the printer)
Email sending (When scan to mail is used
from the printer)
POP before SMTP connection (When scan to
mail is used from the printer)
When Epson Connect is used
Control WSD
> >
Product Specifications
Monochrome
❏ Standard: 8 pel/mm×3.85 line/mm (203 pel/in.×98 line/in.)
❏ Fine: 8 pel/mm×7.7 line/mm (203 pel/in.×196 line/in.)
❏ Super Fine: 8 pel/mm×15.4 line/mm (203 pel/in.×392 line/in.)
❏ Ultra Fine: 16 pel/mm×15.4 line/mm (406 pel/in.×392 line/in.)
❏ Photo: 8 pel/mm×7.7 line/mm (203 pel/in.×196 line/in.)
Color
200×200 dpi
Up to 180 pages (when received ITU-T No.1 chart in monochrome draft mode)
2 times (with 1 minute intervals)
RJ-11 Phone Line, RJ-11 Telephone set connection
Destination
(Server)
FTP server
File server
SMTP server
POP server
Epson Connect
Server
Client computer
Using Port for the Printer
Protocol
FTP (TCP)
SMB (TCP)
NetBIOS (UDP)
NetBIOS (TCP)
SMTP (TCP)
SMTP SSL/TLS (TCP)
SMTP STARTTLS (TCP)
POP3 (TCP)
HTTPS
XMPP
WSD (TCP)
293
Port
Number
20
21
445
137
138
139
25
465
587
110
443
5222
5357