Empire Comfort Systems DVCT36CBP95N-2 Series Homeowner's Manual page 12

Barrier & Glass Removal
1. Lift barrier screen and pull towards you.
2. Use the Glass Latch Tool to grip the latch bar and pry it over
the Glass Frame hook flanges. Tilt the Glass Frame towards you
and pull upwards to remove it from the unit.
See Figures 30 and 31.
Ensure that the latch tool is completely hooked around the
latch before trying to disengage the clips. Glass clips are
tightly sprung. If the latch tool slips off of the latch while
pulling, injury may occur.
GLASS
LATCH
(4 PLACES)
Page 12
MAINTENANCE AND SERvICE
CAUTION
Figure 30
GLASS
LATCH
TOOL
Figure 31
Light Bulb(s) Replacement
1. Remove the following items:
• barrier screen
•
glass frame assembly
This unit comes standard with two lights that are attached to the
roof of the fireplace. To access the light bulb you will remove the
following items by removing four screws per light,
• metal bezel
•
glass
• gasket
NOTE: Use gloves when handling light bulb, oils on your
hand will diminish the life span of the light bulb.
2. Remove old light bulb and replace with a new one.
See Figure 33.
NOTE: You may order light bulbs from your local Empire dealer
or purchase them from your local hardware store.
LIGHT bULb SPECIFICATIONS
35w Clear Halogen, Bi-Pin 6.35mm base,120vac, UL
See Figure 32.
Figure 32
Figure 33
41417-1-0220