Terminals - Proxima C550X Manual

Part names and functions

Terminals

① DC OUT
DC out 12V 1.5A .
② COMPUTER IN1/YCbCr IN/S-VIDEO IN
This is the terminal to input RGB, YCbCr or
S-video signals.
③ COMPUTER IN2/COMPUTER OUT
- Connect a computer output to this terminal.
- Output the analog signal form ② to other
monitor.
④ HDMI
This is the terminal to input HDMI signals.
⑤ LAN
This is the LAN terminal to connect to the
network.
⑥ USB-B
This terminal is used to connect the
projector to the computer with a USB cable
when you want to use the "USB Display"
function.
⑦ USB-A
- When using the "Memory Viewer" function,
insert the USB memory directly to this
terminal.
- Connect A type wireless network adapter to
this terminal.
8
① ②
⑧
⑧ RS-232C
When using RS232 to control the projector,
please connect the serial control line to this
terminal.
⑨ WIRED R/C
Connect the wired remote control cable to
this port while operation the projector by
wired remote control.
⑩ AUDIO OUT
Connect external audio amplifier to this jack.
⑪ AUDIO IN
This is the terminal to input computer audio
signals.
⑫ MONO(R/L)
For a mono audio signal (a single audio
jack), connect it to MONO(R/L) jack.
⑬ VIDEO
This is the terminal to input video signals.
⑭ Remote Control receiver(BACK)
Operation the projector by remote control.
③ ④ ⑤
⑨ ⑩ ⑪ ⑫
⑥ ⑦
⑬ ⑭