Network Control Instructions; Lan Control - Proxima C550X Manual

LAN control

Function : PC controls projector via LAN.
Preparation:
1. Equipments: PC, projector, cables
2. Connection procedures:
Connect the projector to routers or switches of the LAN by direct or cross cable. If it fails to
connect PC and projector by parallel cable, please switch to cross cable as suggested.
3. After the computer is booted and the projector is plugged in, indicator lights of LAN interface
and computer interface will flash continuously.
Operation procedures:
1 Turn on the projector.
2 Obtain network address. DHCP set is displayed as on and obtain network address
automatically. If familiar with network, you can set DHCP as close and obtain network
address manually.
3 Enter network settings menu.
(1) Press MENU button on side control
or remote control to display screen
menu. Press ▲▼ button to select
"Expand" icon, then press OK button.
(2) Press ▲▼ button to select "Network"
setting and press OK button enter
the network setting.
(3) Press ▲▼ button to set DHCP as on.
(4) Press ▲▼ button to "Set" and press
OK button."Please wait..." appears.
 Note:
When connecting to wireless network,please check the SSID/ ESSID and IP address in
●
"Network information" .

Network Control Instructions

Display
Network setting
Network information
Color adjust
MAC address:
Setting IP address:
SSID/ESSID:
Expand
Wireless IP:
Memory
Viewer
Info.
----
LAN
DHCP
IP address
Subnet
Gateway
DNS
Move
ENTER
Network
00:04:A3:97:69:DA
192.168.1.100
NetworkDisplay
172.28.120.1
ENTER Select Back
Network setting
On
Set Cancel
Next Back
75