Table of Contents
Advertisement
4.
Use the u and i arrow buttons to select
one of the settings below for touch response.
Touch Response disabled. Sound
Disabled (Off)
volume is fixed, regardless of key
press speed.
Light
(Light2)
Production of a louder sound
becomes easier, so touch feels lighter
than "Normal".
(Light1)
Normal
(Normal) Normal sensitivity
(Heavy1) Production of a louder sound
becomes more difficult, so touch
Heavy
(Heavy2)
feels heavier than "Normal".
5.
Press the SETTING button to exit the setting
screen.
Changing the Pitch
(Transpose, Tuning, Octave
Shift)
To change the pitch in semitone steps
(Transpose)
The transpose feature lets you change the pitch, in
semitone steps. A simple operation lets you instantly
change the pitch to match that of a singer.
• The transpose setting range is –12 to +12 semitones.
1.
Press the SETTING button to display the
setting screen.
2.
Use the q and w arrow buttons to select
"Keyboard" and then press the ENTER
button.
3.
Use the q and w arrow buttons to select
"Transpose".
T r a n s p o s e
4.
Use the u (–) and i (+) arrow buttons to
set the transpose key.
5.
Press the SETTING button to exit the setting
screen.
Fine Tuning (Tuning)
Use the tuning feature when you need to adjust the
pitch slightly to play along with another musical
instrument. Also, some artists perform their music
with slightly altered tuning. You can use the tuning
feature to adjust tuning so it exactly matches a
performance on a CD.
• The tuning feature specifies the frequency of the A4
note. You can set a frequency within the range of
415.5 to 465.9 Hz. The initial default setting is
440.0 Hz.
• Some CD performances are recorded with
instruments that are tuned slightly different from
standard.
1.
Press the SETTING button to display the
setting screen.
2.
Use the q and w arrow buttons to select
"Keyboard" and then press the ENTER
button.
3.
Use the q and w arrow buttons to select
"Tuning".
T u n i n g
4.
Use the u (–) and i (+) arrow buttons to
fine adjust the tuning.
• The setting can be adjusted in units of 0.1 Hz.
5.
Press the SETTING button to exit the setting
screen.
Playing with Different Tones
EN-23
Advertisement
Table of Contents
