Viewing Cos To Queue; Defining Cos To Queue - 3Com 3CBLSG48 User Manual

Viewing CoS to
Queue
Defining CoS to
Queue
The CoS to Queue Summary Page contains a table that displays the
CoS values mapped to traffic queues.
To view CoS Values to Queues:
1 Click Device > QoS > CoS to Queue > Summary. The CoS to
Queue Summary Page opens.
Figure81 CoS to Queue Summary Page
The CoS to Queue Summary Page contains the following fields:
Class of Service — Specifies the CoS priority tag values, where
zero is the lowest and 7 is the highest.
Queue — Defines the traffic forwarding queue to which the CoS
priority is mapped. Four traffic priority queues are supported.
The CoS to Queue Setup Page contains fields for mapping CoS values
to traffic queues. Four traffic priority queues are supported on the
device, with 1 representing the lowest queue and 4 as the highest.
The highest priority queue functions with strict priority. Queues 1-3
function with WRR priority with the following weights (1, 2 and 10)
respectively.
The monitor user has no access to this page.
C C
HAPTER 13: ONFIGURING
Q O S
153
UALITY F ERVICE