3Com 3CBLSG48 User Manual page 62

The 802.1X Setup Page contains the following fields:
80.1X Global Settings
Port Based Authentication State — Indicates if Port
Authentication is enabled on the device. The possible field values
are:
Enabled — Enables port-based authentication on the device.
Disabled — Disables port-based authentication on the device.
This is the default value.
Authentication Method — Specifies the authentication method
used for port authentication. The possible field values are:
RADIUS — Provides port authentication using the RADIUS
server.
RADIUS, None — Provides port authentication, first using the
RADIUS server. If the port is not authenticated, then no
authentication method is used, and the session is permitted.
None — Indicates that no authentication method is used to
authenticate the port.
Enable Guest VLAN — Provides limited network access to
authorized ports. If a port is denied network access via port-based
authorization, but the Guest VLAN is enabled, the port receives
limited network access. For example, a network administrator can
use Guest VLANs to deny network access via port-based
authentication, but grant Internet access to unauthorized users.
Guest VLAN ID — Specifies the guest VLAN ID.
C 4: M D
HAPTER ANAGING EVICE
S
1
ECURITY