Suzuki 2009 SX4 SEDAN Owner's Manual page 42

Seat Belts and Child Restraint Systems: 3
BEFORE DRIVING
CAUTION
When you move a seatback, make
sure the belt webbing is hooked in
the seat belt hangers so the seat
belts are not caught by the seatback,
seat hinge, or seat latch. This helps
prevent damage to the belt system.
2-29
Seat Belt Inspection
EXAMPLE
65D209S
Periodically inspect the seat belts to make
sure they work properly and are not dam-
aged. Check the webbing, buckles, latch
plates, retractors, anchorages and guide
loops. Replace any seat belts which do not
work properly or are damaged.
WARNING
Be sure to inspect all seat belt assem-
blies after any collision. Any seat belt
assembly which was in use during a
collision (other than a very minor one)
should be replaced, even if damage to
the assembly is not obvious. Any seat
belt assembly which was not in use
during a collision should be replaced
if it does not function properly, it is
damaged in any way or the seat belt
pretensioners were activated.
Child Restraint Systems
Infant restraint - rear seat only
EXAMPLE
80J22-03E
60G332
65D202