Suzuki 2009 SX4 SEDAN Owner's Manual page 162

Using the Transaxle: 10
OPERATING YOUR VEHICLE
Using the Transaxle
4-Speed Automatic Transaxle
6-5
Gearshift lever
The gearshift lever is designed so that it
77J021
can not be shifted out of the "P" position
unless the ignition switch is in the "ON"
position and the brake pedal is depressed.
WARNING
Always depress the brake pedal
before shifting from "P" (Park) (or
"N" (Neutral) if the vehicle is station-
ary) to a forward or reverse gear, to
help prevent the vehicle from moving
unexpectedly when you shift.
Use the gearshift lever positions as
described below:
P (Park)
Use this position to lock the transaxle
when the vehicle is parked or when start-
ing the engine. Shift into Park only when
the vehicle is completely stationary.
R (Reverse)
Use this position to reverse the vehicle
from stop. Make sure that vehicle is com-
pletely stationary before shifting into
Reverse.
N (Neutral)
Use this position for starting the engine if
the engine stalls and you need to restart it
while the vehicle is moving. You may also
shift into Neutral and depress the brake
pedal to hold the vehicle stationary during
idling.
77J028
D (Drive)
Use this position for all normal driving.
With the gearshift lever in "D" range you
can get an automatic downshift by press-
ing the accelerator pedal. The higher the
vehicle speed is, the more you need to
press the accelerator pedal to get a down-
shift.
3 (Low 3)
Use this position for driving on moderate
uphill and downhill gradients. The engine
braking effect on moderate downhills can
be used in this position. The transaxle
shifts up only to 3rd gear.
2 (Low 2)
Use this position to provide extra power
when climbing hills, or to provide engine
braking when going down hills.
80J22-03E