To Temporarily Cancel The Cruise Control; To Turn Off The Cruise Control - Subaru 2004 Legacy Owner's Manual

Starting and operating
At this time, the " " indicator light is illuminated in
the combination meter.
The vehicle will maintain the desired speed.
Vehicle speed can be temporarily increased while
driving with the cruise control activated. Simply de-
press the accelerator pedal to accelerate the vehicle.
When the accelerator pedal is released, the vehicle
will return to and maintain the previous cruising speed.
To temporarily cancel the cruise con-
trol
There are four ways to cancel the cruise control tem-
porarily:
7-44
Depress the brake pedal.
Pull the control lever in the "CANCEL" direction. (if
so equipped)
Depress the clutch pedal (manual transmission ve-
hicles only).
Shift the selector lever into the "N" position (auto-
matic transmission vehicles only).
The "
goes off when the cruise control is cancelled.
To resume the cruise control after it has been tempo-
rarily canceled and with vehicle speed of about 20
UB4010KA
mph (32 km/h) or more, push the control lever upward
in the "ACCEL, RESUME" direction to return to the
original cruising speed automatically.
The "
will automatically come on at this time.

To turn off the cruise control

There are two ways to turn off the cruise control:
Push the main switch again.
Turn the ignition switch to the "ACC" position (but
only when the vehicle is completely stopped).
" indicator light in the combination meter
" indicator light in the combination meter