Parking Light - Subaru 1998 Impreza Owner's Manual

Maintenance and service
5. Disconnect the connector behind the case cap.
6. Release the retainer spring.
7. Replace the bulb with a new one. Then reconnect the connectors and
reinstall the removed parts in the reverse order of removal.
J Parking light
OM-H0244
1. Remove the parking light assembly mounting screw located at the top
of the headlight assembly using the phillips screwdriver.
2. Move the parking light assembly forward until it pops out from the
fender.
3. Remove the bulb holder from the parking light assembly by turning it
counterclockwise.
4. Pull the bulb out of the socket. Install a new bulb.
5. Set the bulb holder into the parking light assembly and turn it clock-
wise until it locks.
6. Set the parking light assembly into the fender. Tighten the mounting
screw.
– CONTINUED –
10-57