Battery Low; Auto Battery Save - Cobra microTALK FRS 23 Operating Instruction

O P E R AT I O N

Battery Low

When battery power
is low, the BATT LOW
indicator will blink.
Auto Battery
Save
Your microTALK radio has a unique circuit
®
designed to extend battery life. If there are no
transmissions within 10 seconds, the unit will
automatically switch to Battery Save mode
and POWER SAVER will appear in the display.
This will not affect
the unit's ability to
receive incoming
transmissions.
Selecting a Channel
1.
With the radio on, select any of the
14 channels by pushing
the CHANNEL UP or
CHANNEL DOWN
CHANNEL UP
& DOWN
button. (N O T E : B o t h
b u t t o n s
radios must be tuned
to the same channel to communicate.)
Selecting a CTCSS
Privacy Code
CTCSS (Continous Tone Coded Squelch
System) is an advanced tone coding system
allowing you to select one of 38 privacy
codes to reduce interference from other users
on the channel.
3
ENGLISH
(N O T E : If you are using a privacy code, both
radios must be tuned to the same channel and
privacy code to communicate. Each channel will
remember the last privacy code you selected.)
To select a privacy code:
1.
After selecting a channel, press and
release the MODE button. Small numbers will
flash next to the
channel in the LCD.
2.
Push the
CHANNEL SELECT
MODE button
button up or down to
select a privacy code. You can hold the button
up or down for fast advance.
3.
When your desired privacy code is
displayed, press and release the MODE button,
or do not push any buttons for 15 seconds.
Calling Another Person
To alert another person that you are calling:
1. Press and release the CALL button.
The other person will hear a 2-second
ringing tone. You
CALL
cannot send or
b u t t o n
receive transmissions
during the 2-second
call tone.