Subaru 1998 Forester Owner's Manual page 245

protection against freezing and corrosion, even if freezing tem-
peratures are not expected. Never mix different kinds of coolant.
D Do not splash the engine coolant over painted parts. The alco-
hol contained in the engine coolant may damage the paint sur-
face.
Change the engine coolant in the following procedures according to the
maintenance schedule in the warranty and maintenance booklet.
1. Remove the under cover.
2. Place a proper container under the drain plug and loosen the drain
plug.
3. Loosen the radiator cap to drain the coolant from the radiator. Then
drain the coolant from the reserve tank. Tighten the drain plug securely.
4. Install the under cover.
Drain plug
HS0179
HS0181
Maintenance and service
Air vent plug Reserve tank
– CONTINUED –
HS0180
10-15