Table of Contents
Advertisement
Start Here
1. Installing the Li-ion battery
Before using the printer for the first time, charge the
Li-ion battery (C52CE97010). Read also the safety
precautions for the rechargeable battery described in
this manual.
For details on handling the Li-ion battery, refer to the
manual included with the battery.
1. Open the battery cover.
Charging the Li-ion battery
You can charge the dedicated Li-ion battery (C52CE97010)
with the printer.
To charge the battery, connect the AC adapter to
the printer with the Li-ion battery installed.
Charge LED
Charging
Charging completed
Charging error
WARNING
Be sure to use the dedicated Li-ion battery (C52CE97010) . Using a battery
other than the one specified may cause fire, explosion, leakage, overheating
or other damage.
CAUTION
When disposing of used batteries, make sure to follow the regulations.
2. Install the Li-ion battery in the
correct orientation.
MEMO
• The Li-ion battery cannot be charged while printing.
• When the power of the charged Li-ion battery seems to run out quickly,
replace it with a new one.
• There is likely to be a charging error or battery error in the following cases.
Contact qualified service personnel.
- The charge LED flashes during charging.
- New Li-ion battery takes significantly longer to charge than the
estimated charging time (less than 3 hours).
3. Close the battery cover.
Top
Specifications
Using the printer with
Easy-Mark Plus
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Label Functions
Key Menu Index
Frame and Table Lists
Symbol List
Technical Support
7
Advertisement
Table of Contents
