Pontiac 2010 Vibe Owner's Manual page 251

12. Reinstall the wheel nuts with
the rounded end of the nuts
toward the wheel. Tighten each
nut by hand until the wheel
is held against the hub.
13. Turn the jack handle
counterclockwise. Lower
the jack completely.
{
CAUTION
Wheel nuts that are improperly
or incorrectly tightened can cause
the wheels to become loose or
come off. The wheel nuts should
be tightened with a torque wrench
to the proper torque specification
after replacing. Follow the torque
specification supplied by the
aftermarket manufacturer when
using accessory locking wheel
nuts. See Capacities and
Specifications on page 11-2 for
original equipment wheel nut
torque specifications.
Notice: Improperly tightened
wheel nuts can lead to brake
pulsation and rotor damage.
To avoid expensive brake repairs,
Vehicle Care
evenly tighten the wheel nuts in
the proper sequence and to
the proper torque specification.
See Capacities and Specifications
on page 11-2 for the wheel nut
torque specification.
14. Tighten the wheel nuts firmly
in a crisscross sequence as
shown.
9-67