2010 Pontiac Vibe Owner Manual Keys, Doors and ... 1-1 Windows Keys and Locks ... 1-2 Doors ... 1-6 Vehicle Security ... 1-7 Exterior Mirrors ... 1-10 Interior Mirrors ... 1-11 Windows ... 1-11 Roof ... 1-13 ... 2-1 Seats and Restraints Head Restraints ...
Page 2
Wheels and Tires ... 9-43 Jump Starting ... 9-69 Towing ... 9-73 Appearance Care ... 9-75 Service and ... 10-1 Maintenance General Information ... 10-1 Scheduled Maintenance ... 10-3 Recommended Fluids, Lubricants, and Parts ... 10-15 Maintenance Records ... 10-18 ...
Page 3
Litho in U.S.A. Part No. 20784572 A First Printing For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited” for Pontiac Division wherever it appears in this manual. This manual describes features that may or may not be on your specific vehicle.
Introduction Using this Manual To quickly locate information about the vehicle use the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found. Danger, Warnings, and Cautions A circle with a slash through it is a...
Page 5
Vehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index. : Airbag Readiness Light : Air Conditioning : Antilock Brake System (ABS) : Audio Steering Wheel ®...
Keys, Doors and Windows Keys and Locks Keys ...1-2 Remote Keyless Entry (RKE) System ...1-3 Remote Keyless Entry (RKE) System Operation ...1-3 Door Locks ...1-5 Power Door Locks ...1-6 Safety Locks ...1-6 Doors Liftgate ...1-6 Keys, Doors and Windows Vehicle Security Vehicle Security ...1-7 Anti-Theft Alarm System ...1-7 Immobilizer ...1-9...
Keys, Doors and Windows Keys and Locks Keys CAUTION Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move.
Page 9
Remote Keyless Entry (RKE) System See Radio Frequency Statement (US, Can) on page 12-16 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada. Remote Keyless Entry (RKE) System Operation The Remote Keyless Entry (RKE) transmitter functions work up to 30 feet (9 m) away from the vehicle.
Page 10
Keys, Doors and Windows Battery Replacement The battery in the transmitter is weak and should be changed if it does not work at the normal range in any location. Notice: When replacing the battery, do not touch any of the circuitry on the transmitter.
Door Locks CAUTION Unlocked doors can be dangerous. • Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked.
Keys, Doors and Windows Power Door Locks On vehicles with this feature, the power door lock switch is located on the armrest of the driver and front passenger door. : Press to lock all the doors. : Press to unlock all the doors. Safety Locks Rear door security locks prevent passengers from opening the...
CAUTION (Continued) • Adjust the Climate Control system to a setting that brings in only outside air and set the fan speed to the highest setting. See Climate Control System in the Index. • If the vehicle is equipped with a power liftgate, disable the power liftgate function.
Page 14
Keys, Doors and Windows The security light is in the center of the instrument panel. Arming the System To arm the system: 1. Close all the doors and the liftgate. 2. Lock the doors and liftgate with the key or Remote Keyless Entry (RKE) transmitter.
How the System Alarm is Activated The system activates the alarm if: • A locked door or the liftgate is unlocked or opened without the RKE transmitter. • A locked door is unlocked or opened without the key. • The liftgate is unlocked or opened with the key.
1-10 Keys, Doors and Windows If any of the following conditions occur, contact your dealer/retailer. • The security light stays on. • The security light does not start flashing when the key is removed from the ignition. • The security light flashes inconsistently.
Interior Mirrors Manual Rearview Mirror Adjust the inside rearview mirror to see clearly behind the vehicle. Hold the mirror in the center to move it up, down, and side to side. The day/night lever lets you adjust the mirror to avoid glare from headlamps behind your vehicle.
1-12 Keys, Doors and Windows Power Windows CAUTION Leaving children in a vehicle with the keys is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move.
Roof Sunroof On vehicles with a sunroof, the controls are on the overhead console. The ignition must be in ON/RUN or Retained Accessory Power (RAP) for the sunroof to work. TILT: Slide the sunshade back. Press to tilt the sunroof. Press again to stop movement at any time.
Page 21
Seats and Restraints Head Restraints Head Restraints ...2-2 Active Head Restraints ...2-3 Front Seats Seat Position ...2-3 Seat Adjustment ...2-4 Reclining Seatbacks ...2-4 Folding Seatback ...2-6 Rear Seats Rear Seats ...2-7 Safety Belts Safety Belts ...2-8 How to Wear Safety Belts Properly ...2-12 Lap-Shoulder Belt ...2-18 Safety Belt Use During...
Seats and Restraints Head Restraints The front seats have adjustable head restraints. The rear seats have adjustable headrests in all seating positions. CAUTION With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash.
The head restraints are not designed to be removed. Always raise the rear center head rest at least one position when there is a passenger seated there. Active Head Restraints Active Head Restraint System The vehicle has an active head restraint system in the front seating positions.
Seats and Restraints Seat Adjustment The driver seat height adjuster is located on the outboard side of the seat. To raise or lower the seat, pull up or push down on the lever repeatedly until the seat is at the desired height.
Page 25
CAUTION Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the safety belts cannot do their job when reclined like this. The shoulder belt cannot do its job because it will not be against your body.
Seats and Restraints Folding Seatback CAUTION If you fold the seatback forward to carry longer objects, such as skis, be sure any such cargo is not near an airbag. In a crash, an inflating airbag might force that object toward a person. This could cause severe injury or even death.
To raise the seatback: 1. Pull up on one of the levers located on either side of the back of the passenger’s seatback. 2. Pull the seatback up and push it back to lock it into place. Make sure the safety belt is not twisted or caught in the seatback.
Seats and Restraints To raise the seatback: 1. Pull the seatback up and push it back to lock it into place. The safety belts should not be twisted or caught in the seatback. CAUTION A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash.
Page 29
CAUTION It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts.
Page 30
2-10 Seats and Restraints Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield...
Page 31
or the instrument panel... or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense.
2-12 Seats and Restraints If I am a good driver, and I never drive far from home, why should I wear safety belts? You may be an excellent driver, but if you are in a crash — even one that is not your fault — you and your passenger(s) can be hurt.
Page 33
If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
Page 34
2-14 Seats and Restraints What is wrong with this? The lap belt is too loose. It will not give nearly as much protection this way. CAUTION You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen.
Page 35
CAUTION You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries.
Page 36
2-16 Seats and Restraints What is wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. CAUTION You can be seriously injured if you wear the shoulder belt under your arm.
Page 37
CAUTION You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt.
2-18 Seats and Restraints Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat so you can sit up straight. To see how, see “Seats” in the Index.
Page 39
4. If equipped with a shoulder belt height adjuster, move it to the height that is right for you. See “Shoulder Belt Height Adjustment” later in this section for instructions on use and important safety information. 5. To make the lap part tight, pull up on the shoulder belt.
2-20 Seats and Restraints Push down on the release button and move the height adjuster to the desired position. The adjuster can be moved up by pushing on the front of the height adjuster. After the adjuster is set to the desired position, try to move it down without pushing the button to make sure it has locked into position.
The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
2-22 Seats and Restraints Safety Belt Care Keep belts clean and dry. CAUTION Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
Airbag System This vehicle has the following airbags: • A frontal airbag for the driver. • A frontal airbag for the right front passenger. The vehicle may have the following airbags: • A seat-mounted side impact airbag for the driver. •...
2-24 Seats and Restraints CAUTION Airbags inflate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to the airbag, as you would be if you were sitting on the edge of your seat or leaning forward.
Page 45
The right front passenger frontal airbag is in the instrument panel on the passenger’s side. Driver Side shown, Passenger Side similar If the vehicle has seat-mounted side impact airbags for the driver and right front passenger, they are in the side of the seatbacks closest to the door.
2-26 Seats and Restraints When Should an Airbag Inflate? Frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes to help reduce the potential for severe injuries mainly to the driver or right front passenger head and chest. However, they are only designed to inflate if the impact exceeds a predetermined deployment...
The vehicle has seat-mounted side impact and roof-rail airbags. See Airbag System on page 2-23. Seat-mounted side impact and roof-rail airbags are intended to inflate in moderate to severe side crashes. Seat-mounted side impact and roof-rail airbags will inflate if the crash severity is above the system’s designed threshold level.
2-28 Seats and Restraints How Does an Airbag Restrain? In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle.
In many crashes severe enough to inflate the airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger airbag. • Airbags are designed to inflate only once. After an airbag inflates, you will need some new parts for the airbag system.
Page 50
2-30 Seats and Restraints The sensors are designed to detect the presence of a properly-seated occupant and determine if the right front passenger frontal airbag and seat-mounted side impact airbag (if equipped) should be enabled (may inflate) or not. According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint...
Page 51
The passenger sensing system is designed to turn off the right front passenger frontal airbag and seat-mounted side impact airbag (if equipped) if: • The right front passenger seat is unoccupied. • The system determines that an infant is present in a rear-facing infant seat.
2-32 Seats and Restraints If the airbag readiness light and the OFF light in the passenger airbag status indicator come on together, it may mean there is a malfunction in the passenger sensing system. Secure the child in the child restraint in a rear seat position in the vehicle and check with your dealer/retailer.
Page 53
If the Off Indicator is Lit for an Adult-Size Occupant If a person of adult-size is sitting in the right front passenger seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. If this happens, use the following steps to allow the system to detect that person and enable the right front passenger...
2-34 Seats and Restraints The passenger sensing system may suppress the airbag deployment when liquid soaks into the seat. If this happens, the off indicator in the passenger airbag status indicator and the airbag readiness light will be lit. Have your dealer/retailer check the system.
Adding Equipment to the Airbag-Equipped Vehicle Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? Yes. If you add things that change the vehicle’s frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly.
2-36 Seats and Restraints Airbag System Check The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag readiness light is working. See Airbag Readiness Light on page 4-12 for more information. Notice: If an airbag covering is damaged, opened, or broken, the airbag may not work properly.
Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle’s safety belts. The manufacturer’s instructions that come with the booster seat, state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder belt until the child passes the below fit test: •...
2-38 Seats and Restraints CAUTION Never do this. Never allow two children to wear the same safety belt. The safety belt can not properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A safety belt must be used by only one person at a time.
Page 59
CAUTION Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Never leave children unattended in a vehicle and never allow children to play with the safety belts. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children...
Page 60
2-40 Seats and Restraints CAUTION Never do this. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the right front seat. Secure a rear-facing child restraint in a rear seat.
CAUTION To reduce the risk of neck and head injury during a crash, infants need complete support. This is because an infant’s neck is not fully developed and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing child restraint settles into the restraint, so the crash forces can be...
Page 62
2-42 Seats and Restraints (B) Forward-Facing Child Seat A forward-facing child seat (B) provides restraint for the child’s body with the harness. (C) Booster Seats A booster seat (C) is a child restraint designed to improve the fit of the vehicle’s safety belt system. A booster seat can also help a child to see out the window.
Children can be endangered in a crash if the child restraint is not properly secured in the vehicle. When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual.
Page 64
2-44 Seats and Restraints A label on the sun visor says, “Never put a rear-facing child restraint in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. CAUTION A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates.
Lower Anchors and Tethers for Children (LATCH System) The LATCH system holds a child restraint during driving or in a crash. This system is designed to make installation of a child restraint easier. The LATCH system uses anchors in the vehicle and attachments on the child restraint that are made for use with the LATCH system.
Page 66
2-46 Seats and Restraints Top Tether Anchor A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of...
Page 67
To assist you in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion. To assist you in locating the top tether anchors, the top tether anchor symbol is located on the cover.
Page 68
2-48 Seats and Restraints Securing a Child Restraint Designed for the LATCH System CAUTION If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed.
Page 69
Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its stowed position, before folding the seat. 1. Attach and tighten the lower attachments to the lower anchors.
Page 70
2-50 Seats and Restraints If the position you are using does not have a headrest or head restraint and you are using a dual tether, route the tether over the seatback. If the position you are using has an adjustable headrest or head restraint and you are using a dual tether, route the tether around the headrest or...
Replacing LATCH System Parts After a Crash CAUTION A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer/ retailer to have the system...
Page 72
2-52 Seats and Restraints If the child restraint does not have the LATCH system, you will be using the safety belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.
5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 74
2-54 Seats and Restraints A label on the sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. CAUTION A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates.
Page 75
You will be using the lap-shoulder belt to secure the child restraint in this position. Follow the instructions that came with the child restraint. 1. Move the seat as far back as it will go before securing the forward-facing child restraint. When the passenger sensing system has turned off the right front passenger frontal and...
Page 76
2-56 Seats and Restraints 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child...
Storage Front Storage The driver storage compartment is located near the left side of the steering column on the bottom of the instrument panel. Pull up on the lever to open the cover. Overhead Console If your vehicle has an overhead console, push on the cover to open.
Page 79
Folding the Cargo Cover: 1. Hold the cargo cover with both hands. 2. Bend one side of the cover toward the body. 3. Twist the other side in the opposite direction. 4. Make a small circle, and then fold the cover inward. Storage 5.
Storage Load Rails and Hooks There are hooks for hanging items in the cabin, luggage compartment, and in the cargo management system, if the vehicle has one. On the front passenger side, press the hook to open and use it. There is a weight limit of 44 lb (20 kg).
Roof Rack System Roof Rack CAUTION If something is carried on top of the vehicle that is longer or wider than the roof rack — like paneling, plywood, or a mattress — the wind can catch it while the vehicle is being driven.
The main components of the instrument panel are the following: A. Power Mirrors on page 1-10. B. Air Vents on page 7-4. C. Turn and Lane-Change Signals on page 5-3. D. Instrument Cluster on page 4-9. E. Windshield Wiper/Washer on page 4-5.
Instruments and Controls Controls Steering Wheel Adjustment A tilt and telescope wheel lets the steering wheel position be adjusted. The adjustment lever is located on the left side of the steering column. Pull the lever down to move the steering wheel up or down and in or out.
Horn Press near or on the horn symbols on the steering wheel pad to sound the horn. Windshield Wiper/Washer The windshield wiper/washer lever is located on the right side of the steering column. Move the lever to one of the following positions: (Mist): Move the lever to mist, for a single wiping cycle and then...
Instruments and Controls Rear Window Wiper/Washer Rear Wiper: Turn the end of the lever to low or high, to turn on the rear window wiper. (Low): Slow wipes. (High): Fast wipes. (Rear Washer): Turn the end of the lever up or down as far as it will go, to spray washer fluid on the rear window.
When adding electrical equipment, be sure to follow the proper installation instructions included with the equipment. Notice: Improper use of the power outlet can cause damage not covered by the warranty. Do not hang any type of accessory or accessory bracket from the plug because the power outlets are designed for accessory power plugs only.
Instruments and Controls Cigarette Lighter For vehicles with a lighter, push the lighter down and it will pop up when it is ready to be used. The ignition switch must be in the ACC/ACCESSORY or ON/RUN position to use the lighter. Notice: Holding a cigarette lighter in while it is heating does not let the lighter back away from...
Instruments and Controls Instrument Cluster This feature is designed to show at a glance how the vehicle is running. It shows vehicle speed, how much fuel is left in the fuel tank and many other things needed to drive safely and economically. United States Base Cluster shown, Canada similar...
4-10 Instruments and Controls Speedometer The speedometer shows the vehicle’s speed in both kilometers per hour (km/h) and miles per hour (mph). Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles. This vehicle has a tamper-resistant odometer.
that the fuel filler door is on the driver side of the vehicle. The fuel gage works only when the ignition switch is turned to ON/RUN. When the gage first indicates E or empty, there is still about 2 gallons ( 7.6 L) of fuel left, but more needs to be added right away.
4-12 Instruments and Controls This light flashes until the right front passenger safety belt is buckled. The passenger safety belt reminder light will not come on if the right front passenger belt is already buckled or if a sensor does not detect the weight of a passenger in that seat.
Passenger Airbag Status Indicator The vehicle has the passenger sensing system. See Passenger Sensing System on page 2-29 for important safety information. The instrument panel has a passenger airbag status indicator. When the vehicle is started, the passenger airbag status indicator will light ON and OFF for several seconds as a system check.
4-14 Instruments and Controls Charging System Light The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working. It should go out when the engine is started.
Page 97
Notice: Modifications made to the engine, transmission, exhaust, intake, or fuel system of the vehicle or the replacement of the original tires with other than those of the same Tire Performance Criteria (TPC) can affect the vehicle’s emission controls and can cause this light to come on.
Page 98
4-16 Instruments and Controls • Make sure to fuel the vehicle with quality fuel. Poor fuel quality causes the engine not to run as efficiently as designed and may cause: stalling after start-up, stalling when the vehicle is changed into gear, misfiring, hesitation on acceleration, or stumbling on acceleration.
Brake System Warning Light The vehicle’s hydraulic brake system is divided into two parts. If one part is not working, the other part can still work and stop the vehicle. For good braking both parts need to be working well. If the warning light comes on, there is a brake problem.
4-18 Instruments and Controls If the regular brake system warning light is also on, there are no antilock brakes and there is a problem with the regular brakes. See Brake System Warning Light on page 4-17. Service All-Wheel Drive Light This light will come on briefly when the ignition is turned on, and the engine is not running, as a check...
See Traction Control System (TCS) on page 8-33 for more information. Contact your dealer/retailer, if the light does not come on or if it stays on. Traction Control System (TCS) Warning Light This warning light comes on briefly when the ignition is turned to ON/RUN.
4-20 Instruments and Controls If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. Low Fuel Warning Light United States Canada This light, on the fuel gage, comes...
Taillamp Indicator Light Canada Only This light comes on when the taillamps are on. See Exterior Lamp Controls on page 5-1 for more information. Low Washer Fluid Warning Light Canada Only This light comes on when the windshield washer fluid is low. See Washer Fluid on page 9-24 for more information.
Page 104
4-22 Instruments and Controls Courtesy Lamp Timer: This feature allows for changing how long the courtesy lamps stay on when all the doors and liftgate are closed and the key is out of the ignition, in LOCK/OFF, or in ACC/ACCESSORY. When the vehicle left the factory the courtesy lamps were programmed to stay on for 15 seconds.
OnStar System ® OnStar System OnStar uses several innovative technologies and live advisors to provide a wide range of safety, security, information, and convenience services. If the airbags deploy, the system is designed to make an automatic call to OnStar Emergency advisors who can request emergency services be sent to your location.
Page 106
4-24 Instruments and Controls OnStar Services Available with the Safe & Sound Plan • Automatic Notification of Airbag Deployment • Link to Emergency Services • Roadside Assistance • Stolen Vehicle Location Assistance • Remote Door Unlock/Vehicle Alert • OnStar Hands-Free Calling with 30 trial minutes •...
Page 107
When the Virtual Advisor feature of OnStar Hands-Free Calling is used, the vehicle also sends OnStar the vehicles GPS location so they can provide services where it is located. OnStar service cannot work unless the vehicle is in a place where OnStar has an agreement with a wireless service provider for service in that area.
Lighting Headlamps on Reminder A tone sounds when the ignition is turned to LOCK/OFF, the driver door is opened and the key is removed from the ignition while the lamps are on. Headlamp High/ Low-Beam Changer The headlamps must be on for this feature to work.
Automatic Headlamp System When it is dark enough outside, the automatic headlamp system turns on the low-beam headlamps at the normal brightness along with other lamps such as the taillamps, sidemarker, parking lamps and instrument panel lights. An indicator light on the instrument panel comes on when the headlamps are on.
Lighting Fog Lamps (Fog Lamps): For vehicles with fog lamps, move the band on the turn signal/multifunction lever to to turn them on. The fog lamps only come on when the headlamps are on low beam. Some localities have laws that require the headlamps to be on along with the fog lamps.
Reading Lamps For vehicles with a sunroof, there is a reading lamp near the sunroof switch. OFF: Turns the lamp off. ON: Keeps the lamp on all the time. Door: Turns the lamp on when any door or the liftgate is opened. The lamp goes off when all the side doors and the liftgate are closed.
Infotainment System Introduction Introduction ...6-1 Operation ...6-2 Radio AM-FM Radio ...6-4 Satellite Radio ...6-6 Radio Reception ...6-8 Fixed Mast Antenna ...6-8 Satellite Radio Antenna ...6-9 Audio Players CD Player ...6-9 MP3 ...6-11 Auxiliary Devices ...6-14 Introduction Read the following pages to become familiar with the audio system’s features.
Infotainment System Operation Radio with CD (MP3) shown, Radio with CD (Base) similar Playing the Radio PWR VOL (Power/Volume): Press to turn the radio on and off. Turn the PWR VOL knob to adjust the volume. CLOCK: Press to adjust the time. Setting the Clock The date does not automatically display.
Page 117
6. To decrease the time or date, do one of the following: turn the TUNE ADJ knob counterclockwise, press SEEK/TRACK , or press (Reverse). 7. To save the settings, press the CLOCK button, or let the display time out. To change the time default setting from 12 hour to 24 hour, and to change the date default setting from month/day/year to day/month/year:...
Infotainment System Setting Preset Stations FAV (Favorites): Press to select up to six pages of favorites. Each page contains six favorite stations, and each page of favorites can contain any combination of AM, FM, or XM™ (if equipped) stations. For vehicles without XM, only four pages of favorites are available.
Page 119
RDS relies on receiving specific information from radio stations and only works when the information is available. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly. Contact the radio station if this happens. When the radio is tuned to an RDS station, the station name or call letters display instead of the...
Infotainment System Satellite Radio Vehicles with an XM™ Satellite Radio tuner and a valid XM Satellite Radio subscription can receive XM programming. XM Satellite Radio Service XM is a satellite radio service that is based in the 48 contiguous United States and 10 Canadian provinces.
Page 121
Scanning Categories (CAT) To scan a desired category: 1. Press the CAT button to enter the category select mode. 2. Turn the TUNE ADJ knob to select a category. 3. Press for two seconds to scan the stations in the selected category.
Infotainment System Radio Reception Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet.
Satellite Radio Antenna For vehicles with XM™ Satellite Radio Service, the antenna is located on the roof of the vehicle. Keep the antenna clear of obstructions for clear radio reception. If the vehicle has a sunroof, the performance of the XM system may be affected if the sunroof is open.
Page 124
6-10 Infotainment System FWD REV (Fast Forward/ Fast Reverse): Press and hold to advance playback quickly within a track. Release to resume playing the track. Press and hold to reverse playback quickly within a track. Release to resume playing the track. BAND: Press to listen to the radio when a CD is playing.
Care of The CD Player Use a marking pen to identify CDs, do not add labels. Do not use CD lens cleaners; they could damage the CD player. Notice: If a label is added to a CD, or more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the...
Page 126
6-12 Infotainment System Root Directory The root directory is treated as a folder. All .mp3 files in the root directory are accessed before folders in the root directory. Empty Directory or Folder Empty folders and directories do not display. The system ignores empty directories and folders and advances to the next directory or folder that has .mp3 files in it.
Page 127
Music Navigator The music navigator feature lets MP3 CDs play in order by artist or album. • The MP3 player scans the disc to sort the files by artist and album ID3 tag information. • It can take several minutes to scan the disc depending on the number of MP3 files recorded to the CD-R.
6-14 Infotainment System RDM (Random): Press the button below the RDM label to hear the tracks in random order. (Previous Folder): Press the button below to go to the first track in the previous folder. (Next Folder): Press the button below to go to the first track in the next folder.
Climate Controls Climate Control Systems Climate Control Systems ...7-1 Air Vents Air Vents ...7-4 Maintenance Passenger Compartment Air Filter ...7-4 Climate Control Systems The heating, cooling, and ventilation for the vehicle can be controlled with this system. A. Air Delivery Mode Control B.
Page 130
Climate Controls Fan Control (Fan): Turn the center knob toward 4 to turn the system on or increase fan speed. If the airflow seems low when the fan is at the highest setting, the passenger compartment air filter may need to be replaced. For more information, see Passenger Compartment Air Filter on page 7-4 and Scheduled Maintenance on...
Page 131
Air Conditioning For vehicles with this feature, there will be the following controls: A/C (Air Conditioning): Press to turn the air conditioning system on or off. An indicator light shows that it is on. MAX A/C (Maximum Air Conditioning): Press the A/C and recirculation buttons at the same time to select MAX A/C.
Climate Controls Air Vents Use the air outlets located in the center and outboard sides of the instrument panel, to change the direction of the air flowing through the vents. Operation Tips • Clear away any ice, snow or leaves from the outside air inlets at the base of the windshield.
Page 133
2. Push the side fastener to release and remove the filter cover. 3. Remove the air filter. 4. Install a new air filter and reassemble the unit by reversing the steps. Replacing the air filter is recommended, but will not damage the vehicle if it is not.
Page 135
Driving and Operating Driving Information Driving for Better Fuel Economy ...8-2 Defensive Driving ...8-2 Drunk Driving ...8-3 Control of a Vehicle ...8-3 Braking ...8-4 Steering ...8-4 Off-Road Recovery ...8-6 Loss of Control ...8-6 Driving on Wet Roads ...8-7 Highway Hypnosis ...8-8 Hill and Mountain Roads ...8-8 Winter Driving ...8-9 If the Vehicle is Stuck ...8-11...
Driving and Operating Driving Information Driving for Better Fuel Economy Driving habits can affect fuel mileage. Here are some driving tips to get the best fuel economy possible. • Avoid fast starts and accelerate smoothly. • Brake gradually and avoid abrupt stops.
Drunk Driving CAUTION Drinking and then driving is very dangerous. Your reflexes, perceptions, attentiveness, and judgment can be affected by even a small amount of alcohol. You can have a serious — or even fatal — collision if you drive after drinking.
Driving and Operating Braking See Brake System Warning Light on page 4-17. Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time. Average reaction time is about three-fourths of a second.
If you turn the steering wheel in either direction several times until it stops, or hold the steering wheel in the stopped position for an extended amount of time, you may notice a reduced amount of power steering assist. The normal amount of power steering assist should return shortly after a few normal steering movements.
Driving and Operating An emergency like this requires close attention and a quick decision. If holding the steering wheel at the recommended 9 and 3 o’clock positions, it can be turned a full 180 degrees very quickly without removing either hand. But you have to act fast, steer quickly, and just as quickly straighten the wheel once you have avoided the object.
The three types of skids correspond to the vehicle’s three control systems. In the braking skid, the wheels are not rolling. In the steering or cornering skid, too much speed or steering in a curve causes tires to slip and lose cornering force. And in the acceleration skid, too much throttle causes the driving wheels to spin.
Driving and Operating Hydroplaning Hydroplaning is dangerous. Water can build up under your vehicle’s tires so they actually ride on the water. This can happen if the road is wet enough and you are going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road.
CAUTION Coasting downhill in N (Neutral) or with the ignition off is dangerous. The brakes will have to do all the work of slowing down and they could get so hot that they would not work well. You would then have poor braking or even none going down a hill.
Page 144
8-10 Driving and Operating Blizzard Conditions Being stuck in snow can be in a serious situation. Stay with the vehicle unless there is help nearby. If possible, use the Roadside Assistance Program on page 12-6. To get help and keep everyone in the vehicle safe: •...
To save fuel, run the engine for only short periods as needed to warm the vehicle and then shut the engine off and close the window most of the way to save heat. Repeat this until help arrives but only when you feel really uncomfortable from the cold.
8-12 Driving and Operating Vehicle Load Limits It is very important to know how much weight your vehicle can carry. Two labels on the vehicle show how much weight it may properly carry, the Tire and Loading Information label and the Certification label.
Page 147
Steps for Determining Correct Load Limit Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
Page 148
8-14 Driving and Operating Example 2 Vehicle Capacity Weight for Example 2 = 453 kg (1,000 lbs). Subtract Occupant Weight 68 kg (150 lbs) × 5 = 340 kg (750 lbs). Available Cargo Weight = 113 kg (250 lbs). Example 3 Vehicle Capacity Weight for Example 3 = 453 kg (1,000 lbs).
Page 149
Never exceed the GVWR for the vehicle, or the Gross Axle Weight Rating (GAWR) for either the front or rear axle. And, if you do have a heavy load, you should spread it out. See “Steps for Determining Correct Load Limit” earlier in this section. CAUTION Do not load the vehicle any heavier than the Gross Vehicle...
8-16 Driving and Operating Starting and Operating New Vehicle Break-In Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: • Do not drive at any one constant speed, fast or slow, for the first 500 miles (805 km).
Page 151
LOCK/OFF: This is the only position from which you can remove the key. This locks the steering wheel, ignition and automatic transmission. Push in the ignition switch as you turn the key toward you. On vehicles with an automatic transmission, the shift lever must be in P (Park) to turn the ignition switch to the LOCK/OFF position.
8-18 Driving and Operating Retained Accessory Power (RAP) These vehicle accessories may be used for less than a minute after the engine is turned off. • Power Windows, if equipped • Sunroof, if equipped The power windows and sunroof will continue to work for less than a minute or until either front door is opened.
Notice: Holding the key in START for longer than 15 seconds at a time will cause the battery to be drained much sooner. And the excessive heat can damage the starter motor. Wait about 15 seconds between each try to help avoid draining the battery or damaging the starter.
8-20 Driving and Operating To Use the Engine Coolant Heater 1. Turn off the engine. 2. Open the hood and unwrap the electrical cord. The electrical cord is located on the driver side of the engine compartment. 3. Plug it into a normal, grounded 110-volt AC outlet.
Page 155
To shift into P (Park), do the following: 1. Hold the brake pedal down and set the parking brake. See Parking Brake on page 8-33 for more information. 2. Move the shift lever into P (Park) by pushing the lever all the way toward the front of the vehicle and to the left.
8-22 Driving and Operating Shifting Out of Park This vehicle has an electronic shift lock release system. The shift lock release is designed to: • Prevent ignition key removal unless the shift lever is in P (Park). • Prevent movement of the shift lever out of P (Park), unless the ignition is in ON/RUN and the brake pedal is applied.
Evaporation Pump The vehicle is equipped with a vacuum pump for the fuel evaporation system. This pump performs a fuel evaporation leakage test approximately five hours after the engine is turned off. You may hear a sound coming from underneath the rear cargo compartment for several minutes.
8-24 Driving and Operating Running the Vehicle While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION Idling a vehicle in an enclosed area with poor ventilation is dangerous.
Page 159
CAUTION It is dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. Do not leave the vehicle when the engine is running unless you have to.
Page 160
8-26 Driving and Operating N (Neutral): In this position, the engine does not connect with the wheels. To restart the vehicle when it is already moving, use N (Neutral) only. Also, use N (Neutral) when the vehicle is being towed. CAUTION Shifting into a drive gear while the engine is running at high speed is...
Automatic Transmission (Five Speed Automatic) The shift lever is located on the console between the seats. P (Park): This position locks the front wheels. It is the best position to use when starting the engine because the vehicle cannot move easily.
8-28 Driving and Operating N (Neutral): In this position, the engine does not connect with the wheels. To restart the engine when the vehicle is already moving, use N (Neutral) only. Also, use N (Neutral) when the vehicle is being towed. CAUTION Shifting into a drive gear while the engine is running at high speed is...
The number displayed in the instrument cluster is the highest gear that the transmission will be allowed to operate in. However, your vehicle can automatically shift to lower gears as required by various driving conditions. This means that all gears below that number are available.
Page 164
8-30 Driving and Operating 2 (Second): Press the clutch pedal as you let up on the accelerator pedal and shift into 2 (Second). Then, slowly let up on the clutch pedal as you press the accelerator pedal. 3 (Third), 4 (Fourth), 5 (Fifth): Shift into 3 (Third), 4 (Fourth) and 5 (Fifth) the same way you do for 2 (Second).
8-32 Driving and Operating Brakes Antilock Brake System (ABS) This vehicle has the Antilock Brake System (ABS), an advanced electronic braking system that helps prevent a braking skid. When the engine is started and the vehicle begins to drive away, ABS checks itself.
Parking Brake To set the parking brake, hold the brake pedal down and pull up on the parking brake lever. If the ignition is on, the brake system warning light will come on. To release the parking brake, hold the brake pedal down. Pull the parking brake lever up until you can press the release button.
Page 168
8-34 Driving and Operating When the ignition is turned to ON/RUN, the system automatically turns on. If the system has been turned off, it will automatically turn on at 55 km/h (35 mph). TCS cannot be turned off above 55 km/h (35 mph). This light should come on briefly when the engine is started.
StabiliTrak System The vehicle has the StabiliTrak system which combines antilock brake, traction and stability control systems. This system automatically controls the brakes and engine to help prevent the vehicle from skidding when cornering on a slippery road surface or turning the steering wheel abruptly.
8-36 Driving and Operating Cruise Control For vehicles with cruise control, the lever is located on the right side of the steering wheel. Cruise control, lets a speed of 25 mph (40 km/h) or more be maintained without keeping your foot on the accelerator.
Page 171
If the cruise control indicator light flashes, press the ON-OFF button once to deactivate the system, and then press the button back on. If the cruise control speed cannot be set or the cruise control cancels immediately after being activated, there may be a problem with the cruise control system.
8-38 Driving and Operating Using Cruise Control on Hills The cruise control performance will vary depending upon the vehicle speed, load, and the steepness of the hills. When going up steep hills, you might have to step on the accelerator pedal to maintain the vehicle speed.
Recommended Fuel Use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, you might notice an audible knocking noise when you drive, commonly referred to as spark knock. If this occurs, use a gasoline rated at 87 octane or higher as soon as possible.
8-40 Driving and Operating Fuels in Foreign Countries If you plan on driving in another country outside the United States or Canada, the proper fuel might be hard to find. Never use leaded gasoline or any other fuel not recommended in the previous text on fuel.
Notice: This vehicle was not designed for fuel that contains methanol. Do not use fuel containing methanol. It can corrode metal parts in the fuel system and also damage plastic and rubber parts. That damage would not be covered under the vehicle warranty.
Page 176
8-42 Driving and Operating The tethered fuel cap is located behind a hinged fuel door on the driver side of the vehicle. To remove the fuel cap, turn it slowly counterclockwise. On some vehicles you may have to push in while turning the cap.
Filling a Portable Fuel Container CAUTION Never fill a portable fuel container while it is in the vehicle. Static electricity discharge from the container can ignite the fuel vapor. You can be badly burned and the vehicle damaged if this occurs. To help avoid injury to you and others: •...
8-44 Driving and Operating Driving Characteristics and Towing Tips CAUTION The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is not driven properly. For example, if the trailer is too heavy, the brakes may not work well —...
Page 179
• Vehicles with an automatic transmission can tow in D (Drive). Shift the transmission to a lower gear if the transmission shifts too often under heavy loads and/or hilly conditions. For vehicles with a manual transmission, it is better not to use the highest gear. •...
Page 180
8-46 Driving and Operating Making Turns Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. The vehicle could be damaged. Avoid making very sharp turns while trailering. When turning with a trailer, make wider turns than normal.
Page 181
Parking on Hills CAUTION Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move. People can be injured, and both the vehicle and the trailer can be damaged.
8-48 Driving and Operating Trailer Towing Before pulling a trailer, there are three important considerations that have to do with weight: • The weight of the trailer. • The weight of the trailer tongue. • The total weight on your vehicle’s tires.
The trailer tongue (A) should weigh 10 to 15 percent of the total loaded trailer weight (B). After loading the trailer, weigh the trailer and then the tongue, separately, to see if the weights are proper. If they aren’t, adjustments might be made by moving some items around in the trailer.
8-50 Driving and Operating Trailer Brakes Does the trailer have its own brakes? Be sure to read and follow the instructions for the trailer brakes so they are installed, adjusted and maintained properly. Because the vehicle has anti-lock brakes, do not tap into the vehicle’s brake system.
Vehicle Care General Information General Information ...9-2 California Proposition 65 Warning ...9-2 California Perchlorate Materials Requirements ...9-3 Accessories and Modifications ...9-3 Vehicle Checks Doing Your Own Service Work ...9-4 Hood ...9-5 Engine Compartment Overview ...9-6 Engine Oil ...9-9 Automatic Transmission Fluid ...9-12 Manual Transmission Fluid ...9-14 Hydraulic Clutch ...9-15...
Vehicle Care Jump Starting Jump Starting ...9-69 Towing Towing the Vehicle ...9-73 Recreational Vehicle Towing ...9-73 Appearance Care Exterior Care ...9-75 Interior Care ...9-80 Floor Mats ...9-83 General Information For service and parts needs, visit your dealer/retailer. You will receive genuine GM parts and GM-trained and supported service people.
California Perchlorate Materials Requirements Certain types of automotive applications, such as airbag initiators, seat belt pretensioners, and lithium batteries contained in remote keyless transmitters, may contain perchlorate materials. Special handling may be necessary. For additional information, see www.dtsc.ca.gov/hazardouswaste/ perchlorate. Accessories and Modifications When non-dealer/non-retailer accessories are added to the vehicle,...
Vehicle Care When you go to your GM dealer/ retailer and ask for GM Accessories, you will know that GM-trained and supported service technicians will perform the work using genuine GM Accessories. Also, see Adding Equipment to the Airbag-Equipped Vehicle on page 2-35.
This vehicle has an airbag system. Before attempting to do your own service work, see Airbag System Check on page 2-36. Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Records on page 10-18.
Vehicle Care Engine Compartment Overview When you open the hood on the 1.8L L4 engine, this is what you see.
Page 191
A. Engine Oil Dipstick. See ″Checking Engine Oil″ under Engine Oil on page 9-9. B. Engine Coolant on page 9-19. C. Washer Fluid on page 9-24. D. Coolant Recovery Tank. See Engine Coolant on page 9-19. E. Engine Oil Fill Cap. See “When to Add Engine Oil”...
Page 192
Vehicle Care When you open the hood on the 2.4L L4 engine, this is what you see.
A. Engine Oil Dipstick. See “Checking Engine Oil” under Engine Oil on page 9-9. B. Engine Coolant on page 9-19. C. Washer Fluid on page 9-24. D. Coolant Recovery Tank. See Engine Coolant on page 9-19. E. Engine Oil Fill Cap. See “When to Add Engine Oil”...
Page 194
9-10 Vehicle Care When to Add Engine Oil 1.8L Engine 2.4L Engine If the oil is below the indent at the tip of the dipstick, add at least one liter/quart of the recommended oil. This section explains what kind of oil to use.
Page 195
• GM6094M Use only an oil that meets GM Standard GM6094M. • SAE 5W-30 SAE 5W-30 is best for the vehicle. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50. •...
9-12 Vehicle Care What to Do with Used Oil Used engine oil contains certain elements that can be unhealthy for your skin and could even cause cancer. Do not let used oil stay on your skin for very long. Clean your skin and nails with soap and water, or a good hand cleaner.
Page 197
Checking the Fluid Level Prepare your vehicle as follows: 1. Park your vehicle on a level place. Keep the engine running. 2. With the parking brake applied, place the shift lever in P (Park). 3. With your foot on the brake pedal, move the shift lever through each gear range, pausing for about three seconds...
9-14 Vehicle Care How to Add Automatic Transmission Fluid Refer to the Maintenance Schedule to determine what kind of transmission fluid to use. Recommended Fluids and Lubricants on page 10-15. If the fluid level is low, add only enough of the proper fluid to bring the level into the area between dimples on the dipstick.
Notice: Too much or too little fluid can damage your transmission. Too much can mean that some of the fluid could come out and fall on hot engine parts or exhaust system parts, starting a fire. Too little fluid could cause the transmission to overheat.
9-16 Vehicle Care When to Check and What to Use The reservoir is located at the back of the engine compartment, on the driver side of the vehicle. Engine Compartment Overview on page 9-6. Refer to the Maintenance Schedule to determine how often you should check the fluid level in your master cylinder reservoir and for the proper fluid.
Page 201
How to Inspect the Engine Air Cleaner/Filter To inspect the air cleaner/filter remove the filter from the vehicle and lightly shake the filter to release loose dust and dirt. If the filter remains caked with dirt, a new filter is required. To inspect or replace the engine air cleaner/filter: 1.8L Engine...
Page 202
9-18 Vehicle Care 2.4L Engine 1. Release the three clips that hold the cover. 2. Lift the cover. 3. Inspect or replace the engine air cleaner/filter. 4. Reinstall the cover. CAUTION Operating the engine with the air cleaner/filter off can cause you or others to be burned.
Cooling System When it is safe lift the hood: A. Electric Engine Cooling Fans B. Pressure Cap C. Engine Coolant Recovery Tank CAUTION An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury.
Page 204
9-20 Vehicle Care What to Use Use a 50/50 mixture of clean, ® drinkable water and DEX-COOL coolant, which will not damage aluminum parts. If this coolant mixture is used, nothing else needs to be added. CAUTION Adding only plain water to the cooling system can be dangerous.
Page 205
How to Add Coolant to the Coolant Recovery Tank If you need more coolant, add the ® proper DEX-COOL coolant mixture at the coolant recovery tank, but be careful not to spill it. Occasionally check the coolant level in the radiator. For information on how to add coolant to the radiator, see Cooling System on page 9-19.
Page 206
9-22 Vehicle Care How to Add Coolant to the Radiator When the coolant in the coolant recovery tank is at the FULL mark, start the vehicle. If the overheat warning continues, there is one more thing that can be done. Add the proper coolant mixture directly to the radiator but be sure the cooling system is cool before you do it.
5. Put the cap back on the coolant recovery tank, but leave the pressure cap off. 6. Start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan. 7.
9-24 Vehicle Care If No Steam Is Coming From Your Engine If an engine overheat warning is displayed but steam is not heard or seen escaping, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: •...
Page 209
How to Check Windshield Washer Fluid To check windshield washer fluid. 1. Pull dipstick out of windshield washer reservoir. 2. Washer fluid should fill the holes between the LOW (B) and NORMAL (A) mark. 3. If the fluid reads LOW (B) add fluid.
9-26 Vehicle Care Brakes This vehicle has disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound can come and go or be heard all the time the vehicle is moving, except when applying the brake pedal firmly.
Brake Fluid The brake master cylinder and, on manual transmission vehicles, the clutch hydraulic system use the same reservoir. The reservoir is filled with DOT-3 brake fluid as indicated on the reservoir cap. See Engine Compartment Overview on page 9-6 for the location of the reservoir.
9-28 Vehicle Care What to Add Use only new DOT-3 brake fluid from a sealed container. See Recommended Fluids and Lubricants on page 10-15. Always clean the brake fluid reservoir cap and the area around the cap before removing it. This helps keep dirt from entering the reservoir.
Vehicle Storage CAUTION Batteries have acid that can burn you and gas that can explode. You can be badly hurt if you are not careful. See Jump Starting on page 9-69 for tips on working around a battery without getting hurt. Infrequent Usage: If the vehicle is driven infrequently, remove the black, negative (−) cable from the...
9-30 Vehicle Care Starter Switch Check CAUTION When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle. 2.
Page 215
2. Push the release lever and slide the wiper assembly toward the driver side of the vehicle. 3. Slide the new wiper assembly into place. 4. Push the release lever down to lock into place. Vehicle Care 9-31 Rear Windshield Wiper 1.
9-32 Vehicle Care 2. Raise the wiper arm until it comes off. You will hear a clicking sound when the arm comes off. 3. Push the rear wiper assembly straight into the rear wiper arm. 4. Reengage the two pins to the rear wiper arm by pushing them down.
Bulb Replacement For the proper type of replacement bulbs, see Replacement Bulbs on page 9-37. For any bulb changing procedure not listed in this section, contact your dealer/retailer. Halogen Bulbs CAUTION Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb.
Page 218
9-34 Vehicle Care 3. Unplug the connector while pressing down on the release tab. 4. Pull the old bulb straight out. 5. Push the new bulb straight in until it clicks. 6. Push the bulb socket into the headlamp assembly and turn it clockwise to secure it in its original location.
Taillamps A. Turn Signal Lamp B. Stoplamp/Sidemarker Lamp/Taillamp C. Back-up Lamp To replace one of these lamps: 1. Open the liftgate. Passenger Side Vehicle Care 9-35 Driver Side 2. Remove the storage compartment cover in the rear cargo area of the vehicle to access the bulbs.
9-36 Vehicle Care 4. Pull the bulb straight out of the socket. 5. Push the new bulb straight in until it clicks to secure. 6. Push the bulb socket in and turn it clockwise to secure. 7. Reinstall the cover. License Plate Lamp To replace the license plate lamp bulb:...
Replacement Bulbs Bulb Exterior Lamp Number High-beam 9005 Headlamps Low-beam 9006 Headlamps Sidemarker Lamp/ 7443 Stoplamp/Taillamp For replacement bulbs not listed here, contact your dealer/retailer. Electrical System Electrical System Overload The vehicle has fuses and circuit breakers to protect against an electrical system overload.
9-38 Vehicle Care Windshield Wipers If the wiper motor overheats due to heavy snow or ice, the windshield wipers will stop until the motor cools and will then restart. Although the circuit is protected from electrical overload, overload due to heavy snow or ice, may cause wiper linkage damage.
Page 223
Fuses Usage Electric Cooling Fans Electric Cooling Fans Antilock Braking System (ABS), Vehicle Stability Control System Fuses Usage ABS, Vehicle Stability Control System Air Conditioning System Charging System Electric Power Steering Vehicle Care 9-39 Fuses Usage Emission Control System Main, Horn, Ignition 2 Headlamp Main Emission Control...
Page 224
9-40 Vehicle Care Fuses Usage Turn Signal Lamps, Hazard Lamps Charging System Starting System, Multiport Fuel Injection System/ Sequential Multiport Fuel Injection System Starting System, Multiport Fuel Injection System/ Sequential Multiport Fuel Injection System Empty Starting System Engine Immobilizer System Fuses Usage Main Body ECU,...
Instrument Panel Fuse Block The fuse block is located under the instrument panel on the driver side of the vehicle. Fuses Usage Parking Lamps, License Plate Lamps, Taillamp, Multiport Fuel Injection System/ Sequential Multiport Fuel Injection System, Instrument Panel Lights Switch Illumination Vehicle Care 9-41...
Page 226
9-42 Vehicle Care Fuses Usage Outside Rearview Mirrors, Audio System, Main Body Engine Control Unit (ECU), Clock, Brake Transmission Shift Interlock Empty Empty Airbag System, Multiport Fuel Injection System/ Sequential Multiport Fuel Injection System, Front Passenger Occupant Classification System Gages and Meters Air Conditioning System, Rear Window Defogger...
Fuses Usage Ignition, Outside Rearview Mirrors, Audio System, Main Body ECU, Clock, Brake Transmission Shift Interlock, Cigarette Lighter Rear Window Defogger, Heated Mirrors, Multiport Fuel Injection System/Sequential Multiport Fuel Injection System Power Windows Wheels and Tires Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer.
9-44 Vehicle Care Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The examples show a typical passenger vehicle tire and a compact spare tire sidewall. Passenger (P-Metric) Tire Example (A) Tire Size The tire size is a combination of letters and numbers used to define a particular tire’s width, height,...
Page 229
Compact Spare Tire Example (A) Temporary Use Only The compact spare tire or temporary use tire has a tread life of approximately 3,000 miles (5 000 km) and should not be driven at speeds over 65 mph (105 km/h). The compact spare tire is for emergency use when a regular road tire has lost air and gone flat.
9-46 Vehicle Care Tire Designations Tire Size The following illustration shows an example of a typical passenger vehicle tire size. (A) Passenger (P-Metric) Tire The United States version of a metric tire sizing system. The letter P as the first character in the tire size means a passenger vehicle tire engineered to standards set by the U.S.
Page 231
Bead The tire bead contains steel wires wrapped by steel cords that hold the tire onto the rim. Bias Ply Tire A pneumatic tire in which the plies are laid at alternate angles less than 90 degrees to the centerline of the tread.
Page 232
9-48 Vehicle Care Maximum Loaded Vehicle Weight The sum of curb weight, accessory weight, vehicle capacity weight, and production options weight. Normal Occupant Weight number of occupants a vehicle is designed to seat multiplied by 150 lbs (68 kg). See Vehicle Load Limits on page 8-12.
Vehicle Capacity Weight number of designated seating positions multiplied by 150 lbs (68 kg) plus the rated cargo load. See Vehicle Load Limits on page 8-12. Vehicle Maximum Load on the Tire Load on an individual tire due to curb weight, accessory weight, occupant weight, and cargo weight.
9-50 Vehicle Care When to Check Check your tires once a month or more. Do not forget to check the compact spare tire, if the vehicle has one. The compact spare should be at 60 psi (420 kPa). For additional information regarding the compact spare tire, see Compact Spare Tire on page 9-68.
Page 235
As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.
9-52 Vehicle Care Tire Pressure Monitor Operation This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS warns the driver when a low tire pressure condition exists. TPMS sensors are mounted onto each tire and wheel assembly, excluding the spare tire and wheel assembly.
Page 237
TPMS Malfunction Light The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute and then stays on for the remainder of the ignition cycle.
9-54 Vehicle Care TPMS Reset The TPMS sensors and transmitters have unique identification codes. Anytime you replace a TPMS sensor or transmitter the identification codes need to be registered and the TPMS needs to be reset (initialized). When the system is initialized, the current air pressure in the tires is set as the tire pressure benchmark.
Tire Rotation Tires should be rotated every 5,000 to 8,000 miles (8 000 to 13 000 km). See Scheduled Maintenance on page 10-3. The purpose of a regular tire rotation is to achieve a uniform wear for all tires on the vehicle. This will ensure that the vehicle continues to perform most like it did when the tires were new.
9-56 Vehicle Care When It Is Time for New Tires Various factors, such as maintenance, temperatures, driving speeds, vehicle loading, and road conditions influence when you need new tires. One way to tell when it is time for new tires is to check the treadwear indicators, which appear when the tires have only 1/16 inch (1.6 mm) or less of tread remaining.
Page 241
GM recommends replacing tires in sets of four. This is because uniform tread depth on all tires will help keep the vehicle performing most like it did when the tires were new. Replacing less than a full set of tires can affect the braking and handling performance of the vehicle.
9-58 Vehicle Care Different Size Tires and Wheels If you add wheels or tires that are a different size than your original equipment wheels and tires, this could affect the way your vehicle performs, including its braking, ride and handling characteristics, stability, and resistance to rollover.
Page 243
Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1.5) times as well on the government course as a tire graded 100.
9-60 Vehicle Care Wheel Alignment and Tire Balance The tires and wheels on the vehicle were aligned and balanced carefully at the factory to give the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing will not be necessary on a regular basis.
Used Replacement Wheels CAUTION Putting a used wheel on the vehicle is dangerous. You cannot know how it has been used or how far it has been driven. It could fail suddenly and cause a crash. If you have to replace a wheel, use a new GM original equipment wheel.
9-62 Vehicle Care If a Tire Goes Flat It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle’s tires properly. If air goes out of a tire, it is much more likely to leak out slowly.
CAUTION (Continued) To be certain the vehicle will not move, put blocks at the front and rear of the tire farthest away from the one being changed. That would be the tire on the other side, at the opposite end of the vehicle.
Page 248
9-64 Vehicle Care 3. Remove the hook holding the jack (B) and remove the jack (B). 4. Remove the jack handle (E) and wheel wrench (F) from the passenger side of the cargo area. 5. Remove the tire/wheel retainer (D) from the compact spare tire (A) and remove the compact spare tire (A).
Page 249
5. Loosen all the wheel nuts. Do not remove them yet. 6. Position the jack and raise the jack lift head to fit over the car flange between the two notches. CAUTION Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed.
Page 250
9-66 Vehicle Care 8. Remove the wheel nuts and the flat tire. 9. Install the spare tire. CAUTION Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident.
Page 251
12. Reinstall the wheel nuts with the rounded end of the nuts toward the wheel. Tighten each nut by hand until the wheel is held against the hub. 13. Turn the jack handle counterclockwise. Lower the jack completely. CAUTION Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off.
9-68 Vehicle Care Storing the Compact Spare Tire CAUTION Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.
Notice: When the compact spare is installed, do not take the vehicle through an automatic car wash with guide rails. The compact spare can get caught on the rails which can damage the tire, wheel and other parts of the vehicle. Do not use the temporary spare on other vehicles.
Page 254
9-70 Vehicle Care To avoid the possibility of the vehicles rolling, set the parking brake firmly on both vehicles involved in the jump start procedure. Put an automatic transmission in P (Park) or a manual transmission in NEUTRAL before setting the parking brake.
Page 255
5. Check that the jumper cables do not have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too. Before you connect the cables, here are some basic things you should know. Positive (+) will go to positive (+) or to a remote positive (+) terminal if the vehicle has one.
Page 256
9-72 Vehicle Care 2.4L L4 Engine Now connect the black negative (−) cable to the negative terminal of the good battery. Use a remote negative (−) terminal if the vehicle has one. Do not let the other end touch anything until the next step. The other end of the negative (−) cable does not go to the dead battery.
To disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative (−) cable from the vehicle that had the dead battery. 2. Disconnect the black negative (−) cable from the vehicle with the good battery. 3.
Page 258
9-74 Vehicle Care Here are some important things to consider before recreational vehicle towing: • What is the towing capacity of the towing vehicle? Be sure to read the tow vehicle manufacturer’s recommendations. • What is the distance that will be travelled? Some vehicles have restrictions on how far and how long they can tow.
Dolly Towing (Front-Wheel-Drive Vehicles Only) To tow the front-wheel-drive vehicle using a dolly, follow these steps: 1. Put the front wheels on a dolly. 2. Move the shift lever to P (Park) for an automatic transmission or Neutral for a manual transmission.
Page 260
9-76 Vehicle Care If the vehicle has a basecoat/ clearcoat paint finish, the clearcoat gives more depth and gloss to the colored basecoat. Always use waxes and polishes that are non-abrasive and made for a basecoat/clearcoat paint finish. Notice: Machine compounding or aggressive polishing on a basecoat/clearcoat paint finish may damage it.
Page 261
Washing the Vehicle To preserve the vehicle’s finish, keep it clean by washing it often. Do not wash the vehicle in direct sunlight and use a car washing soap. Notice: Certain cleaners contain chemicals that can damage the emblems or nameplates on the vehicle.
Page 262
9-78 Vehicle Care Wheels and Trim — Aluminum or Chrome The vehicle may have either aluminum or chrome-plated wheels. Keep the wheels clean using a soft clean cloth with mild soap and water. Rinse with clean water. After rinsing thoroughly, dry with a soft clean towel.
Page 263
Windshield and Wiper Blades Clean the outside of the windshield with glass cleaner. Clean the rubber blades using a lint free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking.
9-80 Vehicle Care At least every spring, flush these materials from the underbody with plain water. Clean any areas where mud and debris can collect. Dirt packed in close areas of the frame should be loosened before being flushed. Your dealer/retailer or an underbody car washing system can do this.
Page 265
Cleaners can contain solvents that can become concentrated in the vehicle’s interior. Before using cleaners, read and adhere to all safety instructions on the label. While cleaning the vehicle’s interior, maintain adequate ventilation by opening the vehicle’s doors and windows. Do not clean the interior using the following cleaners or techniques: •...
Page 266
9-82 Vehicle Care To clean: 1. Saturate a lint-free, clean white cloth with water or club soda. 2. Remove excess moisture. 3. Start on the outside edge of the soil and gently rub toward the center. Continue cleaning, using a clean area of the cloth each time it becomes soiled.
Some commercial products may increase gloss on the instrument panel. The increase in gloss may cause annoying reflections in the windshield and even make it difficult to see through the windshield under certain conditions. Care of Safety Belts Keep belts clean and dry. CAUTION Do not bleach or dye safety belts.
Service and Maintenance General Information General Information ...10-1 Scheduled Maintenance Scheduled Maintenance ...10-3 Recommended Fluids, Lubricants, and Parts Recommended Fluids and Lubricants ...10-15 Maintenance Replacement Parts ...10-17 Maintenance Records Maintenance Records ...10-18 Service and Maintenance General Information Important: Keep engine oil at the proper level and change as recommended.
Page 270
10-2 Service and Maintenance Because of all the different ways people use their vehicles, maintenance needs vary. You might need more frequent checks and replacements. So please read the following and note how you drive. If you have any questions on how to keep the vehicle in good condition, see your dealer/retailer.
Scheduled Maintenance The services shown in this schedule up to 192 000 km (120,000 miles) should be repeated after 192 000 km (120,000 miles) at the same intervals for the life of this vehicle. Footnotes † The U.S. Environmental Protection Agency or the California Air Resources Board has determined that the failure to perform this...
Page 272
10-4 Service and Maintenance 32 000 km (20,000 Miles) ❑ Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. ❑ Rotate tires. See Tire Rotation on page 9-55 for proper rotation pattern and additional information. (See footnote +.) ❑...
Page 273
56 000 km (35,000 Miles) ❑ Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. ❑ Rotate tires. See Tire Rotation on page 9-55 for proper rotation pattern and additional information. (See footnote +.) ❑...
Page 274
10-6 Service and Maintenance 96 000 km (60,000 Miles) ❑ Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. ❑ Rotate tires. See Tire Rotation on page 9-55 for proper rotation pattern and additional information.
Page 275
104 000 km (65,000 Miles) ❑ Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. ❑ Rotate tires. See Tire Rotation on page 9-55 for proper rotation pattern and additional information. (See footnote +.) ❑...
Page 276
10-8 Service and Maintenance 144 000 km (90,000 Miles) ❑ Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. ❑ Rotate tires. See Tire Rotation on page 9-55 for proper rotation pattern and additional information.
Page 277
168 000 km (105,000 Miles) ❑ Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. ❑ Rotate tires. See Tire Rotation on page 9-55 for proper rotation pattern and additional information. (See footnote +.) ❑...
Page 278
10-10 Service and Maintenance ❑ Inspect engine accessory drive belts (or every 48 months, whichever occurs first). Visually inspect belt for fraying, excessive cracks, or obvious damage. Replace belt if necessary. An Emission Control Service. ❑ Replace spark plugs. An Emission Control Service.
Page 279
At Each Fuel Fill It is important to perform these underhood checks at each fuel fill. Engine Oil Level Check Check the engine oil level and add the proper oil if necessary. See Engine Oil on page 9-9. Notice: It is important to check the engine oil regularly and keep it at the proper level.
Page 280
10-12 Service and Maintenance At Least Once a Year Key Lock Cylinders Service Lubricate the key lock cylinders with the lubricant specified in Recommended Fluids and Lubricants on page 10-15. Seat Operation Check Make sure the head restraints stay in position and all seat latches lock.
Page 281
Parking Brake and Automatic Transmission P (Park) Mechanism Check CAUTION When you are doing this check, the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll.
Page 282
10-14 Service and Maintenance Proper procedures to perform these services can be found in a service manual. See Service Publications Ordering Information on page 12-12. • Inspect the front and rear suspension and steering system for damaged, loose, or missing parts or signs of wear.
Recommended Fluids, Lubricants, and Parts Recommended Fluids and Lubricants Usage Engine Oil Engine Coolant Hydraulic Brake/Clutch System Windshield Washer Parking Brake Cable Guides Automatic Transmission Manual Transmission Manual Transmission Shift Linkage Clutch Linkage Pivot Points Service and Maintenance Fluid/Lubricant Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Certified for Gasoline Engines starburst symbol.
Page 284
10-16 Service and Maintenance Usage Fluid/Lubricant Lubriplate Lubricant Aerosol (GM Part No. U.S. 12346293, Floor Shift Linkage in Canada 992723) or lubricant meeting requirements of NLGI #2, Category LB or GC-LB. Multi-Purpose Lubricant, Superlube (GM Part No. U.S. 12346241, Key Lock Cylinders in Canada 10953474).
Page 285
Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your dealer/retailer. Part Engine Air Cleaner/Filter 1.8L L4 Engine 2.4L L4 Engine Engine Oil Filter 1.8L L4 Engine* 2.4L L4 Engine Passenger Compartment Air Filter Spark Plugs** 1.8L L4 Engine 2.4L L4 Engine...
10-18 Service and Maintenance Maintenance Records After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts. Odometer Date Reading Maintenance Record Serviced By Maintenance Record...
Page 287
Service and Maintenance 10-19 Maintenance Record (cont’d) Odometer Maintenance Record Date Serviced By Reading...
Page 288
10-20 Service and Maintenance Maintenance Record (cont’d) Odometer Maintenance Record Date Serviced By Reading...
Technical Data Vehicle Identification Vehicle Identification Number (VIN) ...11-1 Service Parts Identification Label ...11-1 Vehicle Data Capacities and Specifications ...11-2 Engine Drive Belt Routing ...11-4 Vehicle Identification Vehicle Identification Number (VIN) This is the legal identifier for the vehicle. It appears on a plate in the front corner of the instrument panel, on the driver side.
11-2 Technical Data Vehicle Data Capacities and Specifications The following approximate capacities are given in English and metric conversions. Please refer to Recommended Fluids and Lubricants on page 10-15 for more information. Application Air Conditioning Refrigerant R134a Cooling System 1.8L L4 Engine 2.4L L4 Engine Engine Oil with Filter 1.8L L4 Engine...
Page 291
Application Transmission, Automatic (Complete Drain and Refill) 1.8L L4 Engine 2.4L L4 Engine Transmission, Manual (Complete Drain and Refill) 1.8L L4 Engine 2.4L L4 Engine Wheel Nut Torque All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in this manual.
11-4 Technical Data Engine Drive Belt Routing 2.4L L4 Engine 1.8L L4 Engine The 1.8L L4 engine drive belt requires a special tool to service. See your dealer/retailer for service.
Customer Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Pontiac. Normally, any concerns with the sales transaction or the operation of the vehicle will be resolved by the dealer’s sales or service departments. Sometimes,...
Page 294
U.S., call the Pontiac Customer Assistance Center at 1-800-762-2737. In Canada, call General Motors of Canada Customer Communication Centre at 1-800-263-3777 (English) or 1-800-263-7854 (French).
Customer Information Customer Assistance Offices Pontiac encourages customers to call the toll-free number for assistance. However, if a customer wishes to write or e-mail Pontiac, the letter should be addressed to: United States — Customer Assistance Pontiac Customer Assistance Center P.O.
Users To assist customers who are deaf, hard of hearing, or speech-impaired and who use Text Telephones (TTYs), Pontiac has TTY equipment available at its Customer Assistance Center. Any TTY user in the U.S. can communicate with Pontiac by dialing: 1-800-833-PONT (7668).
Other Helpful Links: Pontiac — www.pontiac.com Pontiac Merchandise — www.pontiacmall.com Help Center — www.pontiac.com/ helpcenter • • Contact Us My GM Canada (Canada) — www.gm.ca My GM Canada is a password-protected section of www.gm.ca where you can save information on GM vehicles,...
Roadside Assistance is not a part of the New Vehicle Limited Warranty. Pontiac and General Motors of Canada Limited reserve the right to make any changes or discontinue the Roadside Assistance program at any time without notification.
Page 299
• Flat Tire Change: Service is provided to change a flat tire with the spare tire. The spare tire, if equipped, must be in good condition and properly inflated. It is the owner’s responsibility for the repair or replacement of the tire if it is not covered by the warranty.
12-8 Customer Information Scheduling Service Appointments When your vehicle requires warranty service, contact your dealer/retailer and request an appointment. By scheduling a service appointment and advising your service consultant of your transportation needs, your dealer/retailer can help minimize your inconvenience. If your vehicle cannot be scheduled into the service department immediately, keep...
Page 301
Public Transportation or Fuel Reimbursement If your vehicle requires overnight warranty repairs, and public transportation is used instead of the dealer’s shuttle service, the expense must be supported by original receipts and can only be up to the maximum amount allowed by GM for shuttle service.
12-10 Customer Information Collision Damage Repair If your vehicle is involved in a collision and it is damaged, have the damage repaired by a qualified technician using the proper equipment and quality replacement parts. Poorly performed collision repairs diminish your vehicle’s resale value, and safety performance can be compromised in subsequent collisions.
Page 303
Insuring Your Vehicle Protect your investment in your GM vehicle with comprehensive and collision insurance coverage. There are significant differences in the quality of coverage afforded by various insurance policy terms. Many insurance policies provide reduced protection to your GM vehicle by limiting compensation for damage repairs by using aftermarket collision parts.
12-12 Customer Information Managing the Vehicle Damage Repair Process In the event that your vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of choice, take your vehicle there, or have it towed there.
Current and Past Model Order Forms Technical Service Bulletins and Manuals are available for current and past model GM vehicles. To request an order form, specify year and model name of the vehicle. ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Eastern Time For Credit Card Orders Only (VISA-MasterCard-Discover), visit Helm, Inc.
General Motors In addition to notifying NHTSA (or Transport Canada) in a situation like this, please notify General Motors. Call 1-800-762-2737, or write: Pontiac Customer Assistance Center P.O. Box 33172 Detroit, MI 48232-5172 In Canada, call 1-800-263-3777 (English) or 1-800-263-7854...
This data can help provide a better understanding of the circumstances in which crashes and injuries occur. Important: EDR data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) is recorded.
12-16 Customer Information Radio Frequency Identification (RFID) RFID technology is used in some vehicles for functions such as tire pressure monitoring and ignition system security, as well as in connection with conveniences such as key fobs for remote door locking/ unlocking and starting, and in-vehicle transmitters for garage door openers.
Page 309
Accessories and Modifications ... 9-3 Accessory Power ... 8-18 Adding Equipment to the Airbag-Equipped Vehicle ... 2-35 Add-On Electrical Equipment ... 8-50 Adjustments Seat, Front ... 2-4 Seat, Initial Drive ... 2-3 Air Cleaner/Filter, Engine ... 9-16 Air Filter, Passenger Compartment ...
Page 315
Park Shifting Into ... 8-20 Shifting Out of ... 8-22 Parking ... 8-22 Brake ... 8-33 Over Things That Burn ... 8-23 Passenger Airbag Status Indicator ... 4-13 Passenger Compartment Air Filter ... 7-4 Passenger Sensing System ... 2-29 Perchlorate Materials Requirements, California ...
Page 316
INDEX Safety Belts ... 2-8 Care ... 2-22 Extender ... 2-21 How to Wear Safety Belts Properly ... 2-12 Lap-Shoulder Belt ... 2-18 Reminders ... 4-11 Replacing After a Crash ... 2-22 Use During Pregnancy ... 2-20 Safety Defects Reporting General Motors ...