Hot Plug [Disabled] (SATA6G_1 (Charcoal Black) ~ SATA6G_4(Charcoal
Black))
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
3.6.6
PCH-FW Configuration
This item allows you to configure the firmware TPM.
3.6.7
Onboard Devices Configuration
HD Audio Controller [Enabled]
This item allows you to use the Azalia High Definition Audio Controller. Configuration options:
[Disabled] [Enabled]
RGB LED Lighting [On]
[On]
[Off]
Wi-Fi Controller [Enabled]
[Enabled]
[Disabled]
Intel LAN Controller [Enabled]
[Enabled]
[Disabled]
3.6.8
APM Configuration
ErP Ready [Disabled]
Allows BIOS to switch off some power at S5 to get the system ready for ErP requirement.
When set to [Enabled], all other PME options will be switched off.
Configuration options: [Enable(S4+S5)] [Enable(S5)] [Disabled]
3.6.9
Network Stack Configuration
The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.
3.6.10
HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
3.6.11
USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
3-14
The LEDs will always light up at the S0(Working), S3(Sleep), and S5(Soft
off) states, but not light up at the S4/S5 state when the ErP Ready item is
enabled.
The LEDs will not light up.
Enables the Wi-Fi controller.
Disables the controller.
Enables the Intel
LAN controller.
®
Disables the controller.
Chapter 3: BIOS Setup