Table of Contents
Advertisement
1.1.7
Onboard LEDs
1.
POST State LEDs
The POST State LEDs provide the status of these key components during POST
(Power-On Self-Test): CPU, memory modules, VGA card, and hard disk drives. If an
error is found, the critical component's LED stays lit up until the problem is solved.
STRIX H270I GAMING CPU/DRAM/
BOOT_DEVICE/VGA LED
2.
RGB LED
The RGB LED lighting control provides several lighting schemes, which allow you
to customize your favorite LED effect. You can set your favorite LED effect to cast
a stunning multi-color glow across your build, change shades to indicate CPU
temperature, pulsate in time to the beat of your music, or set your favorite color for
each pair of LEDs.
STRIX H270I GAMING RGB LED Lighting
1-10
BOOT_DEVICE_LED [yellow green]
VGA_LED [white]
DRAM_LED [yellow]
CPU_LED [red]
RGB1
RGB2
RGB3
RGB4
RGB5
RGB6
RGB LED(Bottom)
RGB7
RGB8
RGB9
RGB10
RGB11
RGB12
Chapter 1: Product Introduction
Advertisement
Table of Contents
