Table of Contents
Advertisement
3)
Press as to select [TIME ZONE].
4)
Press qw to switch [TIME ZONE].
Setting the date and time manually
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3)
Press as to select [ADJUST CLOCK].
4)
Press the <ENTER> button.
f The [ADJUST CLOCK] screen is displayed.
5)
Press as to select an item, and press qw to set the local date and time.
6)
Press as to select [APPLY], and press the <ENTER> button.
f The setting of the date and time will be completed.
Setting the date and time automatically
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3)
Press as to select [ADJUST CLOCK].
4)
Press the <ENTER> button.
f The [ADJUST CLOCK] screen is displayed.
5)
Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
6)
Press as to select [APPLY], and press the <ENTER> button.
f The setting of the date and time will be completed.
Note
f To set the date and time automatically, the projector must be connected to the network.
f If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is set to [ON], [NTP SYNCHRONIZATION] will return to
[OFF]. If [NTP SYNCHRONIZATION] is set to [ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].
f Access the projector via a web browser to set the NTP server. Refer to "[Adjust clock] page" (x page 209) for details.
f The [TIME ZONE] setting is reset to the factory default when the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA]
is executed. However, the date and time based on the local date and time setting (Coordinated Universal Time, UTC, Universal Time,
Coordinated) will be maintained without being initialized.
f The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Consult
your dealer.
[SCHEDULE]
Set the command execution schedule for each day of the week.
Enabling/disabling the schedule function
1)
Press as to select [SCHEDULE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Chapter 4 Settings — [PROJECTOR SETUP] menu
Disables the schedule function.
Enables the schedule function. Refer to "How to assign a program" (x page 166) or "How to set a
program" (x page 166) for how to set the schedule.
ENGLISH - 165
Advertisement
Table of Contents
