Table of Contents
Advertisement
[OFF]
Adjusting signal level automatically
1)
Press as to select [AUTO SETUP].
2)
Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
3)
Press as to select [SIGNAL LEVEL ADJUST].
4)
Press qw to switch the item.
[OFF]
[ON]
Note
f [SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.
[BACKUP INPUT SETTING]
Set the backup function that switches the signal to the backup input signal as seamless as possible when input
signal is disrupted.
1)
Press as to select [BACKUP INPUT SETTING].
2)
Press the <ENTER> button.
f The [BACKUP INPUT SETTING] screen is displayed.
3)
Press as to select [BACKUP INPUT MODE].
4)
Press the <ENTER> button.
f The [BACKUP INPUT MODE] screen is displayed.
5)
Press as to select the combination of the input and press the <ENTER> button.
Primary input
[DVI-D]
[SDI1]
[SDI1]
[SDI2]
6)
Press the <MENU> button.
f The [BACKUP INPUT SETTING] screen is displayed.
7)
Press as to select [AUTOMATIC SWITCHING].
f When [BACKUP INPUT MODE] is set to [OFF], [AUTOMATIC SWITCHING] cannot be selected.
8)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
Note
f The backup function is enabled when [BACKUP INPUT MODE] is set to anything other than [OFF] and same signal is input to the primary
input and the secondary input.
f To switch to the backup input signal using the backup function, make sure that the following three conditions are satisfied to be ready to use
the function.
g Set [BACKUP INPUT MODE] to anything other than [OFF].
g Input the same signal to the primary and secondary inputs.
124 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Does not perform automatic adjustment.
Does not perform automatic adjustment.
Adjusts black level (the [PICTURE] menu → [BRIGHTNESS]) and white level (the [PICTURE] menu
→ [CONTRAST]) when automatic setup is executed.
Secondary input
[OFF]
[HDMI]
[SDI2]
[DVI-D]
[HDMI]
Switches to the secondary input (primary input) automatically when the input signal for primary input
(secondary input) is disrupted.
Disables the automatic input switching function.
Details
Disables the backup function.
Enables the backup function.
Advertisement
Table of Contents
