Advertisement
NOTES
Pull out the power plug to repair and make sure that the Washing Machine has been properly
grounded.
Concerning Wash
PROBLEM
Is the Power properly connected?
Is there a whirring sound from the
Wash Motor when turned on?
Is the Condeser properly con-
nected?
NO
Pulsator
does not
rotate.
Is the Motor hot?
(In case there is Thermal Protector)
Is the Wiring good?
(Refer to the Wiring Diagram)
Is the contact of Wash Timer good?
Is the Wash Load appropriate?
Are the Pulsator and Motor
Pulleys securely assembled?
Pulsator
does not
rotate
smoothly.
Does the V-Belt slip?
Are there impurities between the
Pulsator.
CHECK POINT
YES
YES
NO
YES
YES
YES
YES
YES
NO
5. TROUBLESHOOTING GUIDE
CAUSE
NO
NO
Motor does not start due to
opening the Condenser circuit
YES
Power has been cut off by
the Thermal Protector.
NO
Improper wiring
NO
Defective Wash Timer
Defective Wash Motor
NO
The wash load is more
than 8.0kg (160C) or
10.0kg (170C)
NO
Defect of mechanical
assembly
YES
Worn out V-Belt
YES
Revolution obstructed by
impurities
SOLUTION
Reconnect the Power Cord.
Reconnect the Condenser.
Wash restart when Motor
cools.
Reconnect the wiring
Replace Wash Timer
Replace Wash Motor
Reload with proper wash
load.
Tighten the screws fixed on
the Pulleys.
Replace V-Belt
Remove impurities after
disassembling pulsator.
11
Hide quick links:
Advertisement
