Setting Up A New Wlan Using A Wireless Router And A Broadband Modem - Dell XPS M1730 Owner's Manual

Device Manager
1 Click Start
2 Click Classic View on the menu on the left side of the Control Panel.
3 Double-click Device Manager.
NOTE:
The User Account Control window may open.
4 Click Continue on the User Account Control window if it opens.
5 Click the + next to Network adapters to list the utility that manages your
wireless network card.
If a network adapter is not listed, you may not have a wireless network card.
If a network adapter is listed, you have a wireless network card. To view
detailed information about the wireless network card:
1 Right-click the name of the network adapter.
2 Click Properties.
The Order Confirmation for Your Computer
The order confirmation that you received when you ordered your computer
lists the hardware and software that shipped with your computer.
Setting Up a New WLAN Using a Wireless Router and a Broadband
Modem
1 Contact your Internet service provider (ISP) to obtain specific information
about the connection requirements for your broadband modem.
2 Ensure that you have wired Internet access through your broadband
modem before you attempt to set up a wireless Internet connection (see
"Connecting a Network or Broadband Modem Cable" on page 75).
3 Install any software required for your wireless router. Your wireless router
may have been shipped with installation media. Installation media usually
contains installation and troubleshooting information. Install the required
software according to the instructions provided by the router
manufacturer.
4 Shut down your computer and any other wireless-enabled computers in
the vicinity through the Windows Vista Start button
5 Disconnect your broadband modem power cable from the electrical outlet.
, and then click Control Panel.
Setting Up and Using Networks
.
77