Removing Tools; Attaching Bowl Lid; Removing Bowl Lid; Processing - Bosch MUM5X GB Series User Manual

en Basic operation
To insert the kneading hook:
3.
Insert the kneading hook with
‒
the protective cap fitted in the
main drive.
Turn the protective cap until the
‒
kneading hook engages fully.
→ Fig.
12
The protective cap
the main drive completely.

Removing tools

Pull the tool completely out of the
▶
drive.
→ Fig.
13

Attaching bowl lid

Requirements
¡ The required tool is used here.
¡ The bowl has been inserted.
¡ The swivel arm is closed.
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
→ Fig.
14
Lift the lid slightly at the front, slide
2.
fully onto the bowl and set down.
→ Fig.
15
The filling shaft must face towards
the front.
Push the swivel arm down until it
3.
engages.
→ Fig.
16

Removing bowl lid

Press the release button, raise the
1.
swivel arm slightly and hold in
place.
Lift the lid slightly at the front and
2.
pull it out towards the front.
Push the swivel arm up until it en-
3.
gages.
18
must cover

Processing

You can find out everything you need
to know about processing food here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Tool or accessory
Processing ingredients with tools
WARNING
Risk of injury!
Rotating drives, tools or accessory
parts may cause injury.
Keep hands, hair, clothing and
▶
utensils away from rotating parts.
Setting
1-7
1-5
1-3
1
3-5
3-7
3-7
3-5
7
5-7
3-7
M
M
5-7