Oldsmobile 1997 Aurora Owner's Manual page 62

Customizing Your Automatic Door Locks Feature
You can program the automatic door locks feature to
change
to the following modes:
Mode Operation
0 No automatic door lock or unlock.
1
2
3
All doors automatically lock when
shifted out of PARK (P). No automatic
door unlock.
All doors automatically lock when shifted
out of PARK (P). Only the driver's door
automatically unlocks when shifted into
PARK (P).
All doors automatically lock when shifted
out of PARK (P). All doors automatically
unlock when shifted into PARK (P).
Vehicles are delivered programmed in Mode 3.
To change modes:
1. Close all doors and turn the ignition on. Keep all
2. Press and hold the driver's power door lock switch
doors closed throughout this procedure.
through Step 4.
3. Press the LOCK button on the Remote Lock Control
transmitter. The automatic door locks will remain in
the current mode.
4. Press the LOCK button on the transmitter again.
Each time the transmitter's LOCK button is pressed,
the mode will advance by one, going from Mode 3 to
0 to 1, etc.
NOTE: The door locks will cycle according to the
mode entered while customizing memory door locks.
(Mode "0" has no feedback.)
5. Release the power door lock switch. The automatic door
locks will remain in the most recent mode selected.
6. Turn the ignition to OFF,
2-6